Jump to content
SAU Community

Paint Problems - Advice Needed

NuGGeT

By NuGGeT,
in Western Australia

 Share

Recommended Posts

NuGGeT Proficient

NuGGeT

Posted
Posted

Hey, basically I’m after some advice for my cars paint job.

I and trying to figure out wat will fix the following problems, weather it be taking my car to a detailer, maybe cut n polish or getting a another clear coat not sure wat will fix the following and who to see about.

I want to get rid of the minor defects that manage to piss u off the most.

Ø Pin dents – got 1 or 2

Ø Scratches to the paint from doors ect.

Ø Minor paint chips

Ø Graze on the door from someones trolley.

Now the things that really bug me

Ø I have kind of deepish swirl marks all over the car, they come out really harsh looking in the sun

Ø Bonnet has a lot of swirl marks and looks like it has less of a clear coat then the rest of the car, like the polish or wat ever has been stripped down a little.

Ø Roof – worst of the worst, my roof is starting to fade a little, has minor cracks and major swirl marks on it. It also looks like a lot of the clear coat has been taken off it.

Now short of getting the car resprayed, wat options does one have? Any advice would be great. And names and contacts for people that would do a decent job would be great (hills area would be good but anywhere round perth is cool)

Also I’m after seeing someone to fix these problems not a home job that one does, such as using scratch x ect.

Link to comment
https://www.sau.com.au/forums/topic/41748-paint-problems-advice-needed/
Share on other sites
25GTT Veteran

25GTT

Posted
Posted

A very good friend of mine works for Car care.. mobile service. For thos of you that have seen my car (especially on sunday for the photo shoot) my cars paint is as shiny as the day it left the showroom.

He had a 89 model blue VN commodore that was meant to be blue but had faded to grey!!! 3 hours later his car was back to a beautiful shade of blue again.

You all know how protective of my car I am so when i use someone to do something they have to be good.

Pm me if ya interested..... i thoroughly recommend him and i think he could get that beautiful shiny colour back up and fix up most of those probs!!!

I have been in talks with him to get all SAU members very cheap prices..... cheaper than most detailers........

I will prob write up a thread in regards to it soon once i get more details....

25GTT Veteran

25GTT

Posted
Posted

Thanks Aidwin:-)

OK guys, i will organise a bit of a group buy so to speak....

What exactly are we after....

wash plus small cut & polish and buff...... that should get out the swirl marks and generally bring the paint up to its gleaming self again, unles if ya paint is BADLY faded then you would go for a deep cut.

interior aswell??

so far Ineterested i have:

Nugget

Bless_you

Jolinator

Godfather

I would be happy in saying the above mentioned of what to get done will be Saffice but I am sure Patrick will do that little bit extra.... HE IS A PERFECTIONIST!, you will see what i mean with his van!!!

Just let me know if you guys want interior done aswell.. or just the paint.... as there is a few people I am sure the prices will be VERY cheap.... normally he said he would do my friends a cheaper than normal price but now theres a few we could prob get even more cheaper..

MLCrisis Proficient

MLCrisis

Posted
Posted

Hi guys. A subject that interests me too. I also have a niggling scrape on the bottom of the passenger door which is starting to rust (Aaagggghhh!) :D . So I need to do something soon. Not sure that Car Care will do painting of stone chips and this type of thing. I think they just do the cut and polish. Am I wrong? If they don't, who is recommended for touch up prior to a polish?

Also, as a matter of interest, the guy who owns Car Care has a beautiful Supra Aerotop, manual. :aroused: It is red (the worst colour for fading in the sun) and has "Speedshine" written on the flanks. It looks fantastic.

25GTT - pm on the way.

Cheers.

25GTT Veteran

25GTT

Posted
Posted

around the $170 mark is what you would NORMALLY pay!!

I can assure you he is going to do a LOT better deal than that..... he is been a very close friend of mine for 10 years and loves skylines as much as what i do he will do us a very good price....... he should be paying us to detail our cars! ahhah!!

OK he is going to call me tomorrow with exact prices for this! sorting it out at the moment :-)

he is going to quote us for wash, cut & polish, & buff....

the materials he uses are meguirs and even better stuff.... so should be good.

Nizmo Grand Master

Nizmo

Posted
Posted

Dan put me down as interested too.

If he can shine up a black car i'll personally kiss his feet.... when i had my accident the panel beater had my car detailed but the detailer didnt get all the polish off my car now i got all these white spots i cant get rid of. :D

25GTT Veteran

25GTT

Posted
Posted

Lauren put it this way,

I went to SST the weekend before the photo shoot, i was teased by Paul and the rest of the posse becuase of my car being a show car and being so frickin dirty!!

Paul and Aidwin were both pretty impressed as to how it still gleams. Patrick spent 6 hours on it!!!!!!!!!!! poor bugger but it looked like it had just come out the showroom!!!!

25GTT Veteran

25GTT

Posted
Posted

OK guys I have now received a price range from Patrick.

For a full maximum polish taking anyting up to 6-7 hours you would normally look at $220.

He has said $150 for a job such as this. Now a normal wash and small cut polish plus buff looking at $170....... he is looking at $100.

Basically $100 - $150...... we have managed about 25 - 30% off!!!!!!

For those that want this please PM me for his number he is expecting your phone call. He is a mobile service so he can come to you wherever you are. He has asked that he does it on a saturday as it may take some time to give your car love and affection.

So basically on a saturday he can come to where ever you are and expect to pay $100 - $150 as to how full on you want it. YOU MUST SAY YOU ARE FROM SKYLINES AUSTRALIA when talking to him otherwise lookin at the $220 mark!

Everyone PM me away!!

GTRboy Proficient

GTRboy

Posted
Posted

dan: i want to get all kinda liek paint scracthes off, so it look nice and clean etc...good paint job n that, cos if i read correctly thats wat it does, then well im in to....

need to just touch up places on front bar and the back on the bottom etc.....

just want to make it shiney....

put me down, and can u pm me or just reply in this thread

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      M35 Aftermarket Fuel Pump

      By MBS206 · Posted

      Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...