Jump to content
SAU Community

Recommended Posts

Hi Guys,

Need to pay some debts so parts will need to go :(

Up first is my spare turbo which i was pretty keen to try out with my combo as the results would be epic BUT unfortunately it needs to go....

Genuine Garrett GT3082 turbo with .82 Ext Gate rear housing, extrude honed housings and no shaft play, this turbo is in great condition.

This turbo is in very good condition and will be awesome on any Rb25/26 combo, chasing $795.00 for it (Currently in a Garrett turbo box with packaging etc)

Pic -

post-47580-0-14654200-1358997584_thumb.jpg -

Next is tyres -

2 x 235/40/18 Kuhmo KU36 Street Semi tyres, Still legal tread, look like new but are slightly feathered from poor wheel align, sell for $220 for the pair

2 x 275/35/18 Nexen N3000 tyres, Tread like new, not the grippiest things i have driven on but a hell of a lot of life left, sell for $200 for the pair

2 x 275/45/18 Falken jap tyres, should be grippy but were too big for my car, awesome tread (Worn slightly in centre from overinflation) sell for $150 for the pair

OR Take all 6 tyres for $500 (Photos can be taken but they are black and round, serious buyers will get pics)

And a diff -

R34GTT R200 DIFF centre and shafts, this diff is shimmed up and basically locked, it was running in my 34 but had an oil leak... Needs the right shaft seal replaced and should be good to go, I replaced it with a Nismo mechanical so i have no need for this, Sell for $200 (Cheap due to needing a seal and oil etc)...

And a Boost controller -

HKS EVC 5 Boost controller, this unit was in my car and would go fine for ages and then have an Err100, If you google it there is a few solutions but i do not have the time nor do i have the patience for this thing, i paid $550 brand new and it was in the car for less that 6 months, Sell for $300 (Who knows you could fix it easy and have a brand new HKS controller dirt cheap)

MSCN Billet fuel filter, never replace your filters again, wash it and go again, this is the -6 black version found here http://www.mscn.com.au/scripts/prodView.asp?idproduct=362 and it did around 2000kms on my car, once again as new, sell for $100 (Retail is $155 i think)

There are so many spare bits in my shed from the car etc that i will need to sell, i have a lot of stock parts too that ill try list when i sort it all out, basically anything i am not using will be sold.

Msg me on 0434353292 or send a PM if interested, low balls will be ignored, this is a good turbo for the money! Located near Newcastle.

PM is normally the best way to get me as i then know who you are, random numbers make it hard to keep a track of names...

Thanks

Mat

PM's and Txt replied.... If you want pics ill send them via MMS no problem :)

Hey mate I'm new to this. Is this turbo bolt in for a RB25 NEO?

Will require supporting mods and a few things to bolt it up... If you want a direct fit you need to go something like a HG or Kando kit etc.....

Also, i should clarify it is a single scroll T3 rear housing, i have had a few txts asking..... Sorry if i wasnt clear!

If i can find it i will chuck in a free K&N pod filter with the turbo if it sells soon :D

  • 2 weeks later...

$750 cash for turbo - pick up!! Can meet Newcastle/Hunter or Central Coast areas if needed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...