Jump to content
SAU Community

Recommended Posts

Hi

There is a come and try day on at the local hillclimb track just north of Raymond Terrace

Starts at 9 but would need to be there around 8 at the latest to do paperwork etc

Is open to any car and driver and all safety gear is supplied if you don't have your own helmet extinguisher etc.

If interested can meet at the BP at the end of the freeway from 715 for a 745 firm departure and cruise up as a group

If you want need more info post here or PM me

Thanks

Martin

Link to comment
https://www.sau.com.au/forums/topic/418731-come-and-try-hillclimb-16th-feb/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Hi

There is a come and try day on at the local hillclimb track just north of Raymond Terrace

Starts at 9 but would need to be there around 8 at the latest to do paperwork etc

Is open to any car and driver and all safety gear is supplied if you don't have your own helmet extinguisher etc.

If interested can meet at the BP at the end of the freeway from 715 for a 745 firm departure and cruise up as a group

If you want need more info post here or PM me

Thanks

Martin

any more info?

Who is hosting?

Actual location?

Cut off number of entrants?

Expected amount of runs?

Im interested, just want to get an idea of it.

any more info?

Who is hosting?

Actual location?

Cut off number of entrants?

Expected amount of runs?

Im interested, just want to get an idea of it.

http://www.mgcarclub.com.au/

Should be on the front page of the link

Location is 10 mins north of Raymond terrace

While it is not a compition event testing of the timing equipment will be done on the day

Should get 5+ runs at the hill which consist of a warm up run then another fun straight after so five double runs

http://www.mgcarclub.com.au/

Should be on the front page of the link

Location is 10 mins north of Raymond terrace

While it is not a compition event testing of the timing equipment will be done on the day

Should get 5+ runs at the hill which consist of a warm up run then another fun straight after so five double runs

cheers, will check it out when I get home.

I think i may get the GTR out for this one, HICAS will be locked, power slides will be had.

Ok so myself and Sushi are interested in this, will meet with you at BP i think, ill discuss it further with him.

Edited by T4NK

Okay so after talking to some of the car club peps the numbers are being capped at 30 with a first in first served basis

Keep an eye on the link for entry forms and get them in ASAP if you want to run

Will give everyone an idea of what it's like and see if we would want more events in the future

Okay so after talking to some of the car club peps the numbers are being capped at 30 with a first in first served basis

Keep an eye on the link for entry forms and get them in ASAP if you want to run

Will give everyone an idea of what it's like and see if we would want more events in the future

Can you send details as soon as they are up as there are 34's coming from the coast and Sydney as well, dont want them coming up if its a no go.........

i will be keen to come to this, probably as a spectator though, and take some pics etc..

We will have to cruise together too it, even though its only 10mins past home lol

If the boys from Sydney can get a spot we will have a good R34 car show happening lol

Can you send details as soon as they are up as there are 34's coming from the coast and Sydney as well, dont want them coming up if its a no go.........

Yep

Just had a phone call from the club and they want a list of names of who is coming so can I get that by this arvo by PM or text to 0431398364 and I will give them an idea of numbers

I have tried to reserve spots but need numbers

Sup regs still not done apparently but will let you all know as soon as they are

I'll be up to spectate as well, don't think I will get a run as be driven there to many times

Yep

Just had a phone call from the club and they want a list of names of who is coming so can I get that by this arvo by PM or text to 0431398364 and I will give them an idea of numbers

I have tried to reserve spots but need numbers

Sup regs still not done apparently but will let you all know as soon as they are

I'll be up to spectate as well, don't think I will get a run as be driven there to many times

Well put me down for sure, if the 34 is broken for some reason then Carmen can run the GTi lol.... It'd beat my car anyway lol

Ill PM the boys!




  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...