Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just seeing if there is any interest in Adelaide for my ROH Boost R 17" Black rims, they have good tyres with probably over 80% tread.

I will get pics up tonight and confirm what they are.

I also have a set (brand new still with stickers) of Pirelli P6 17" , pretty sure they are a 245 profile ? (once again will confirm tonight and provide pictures)

I will be looking for something alot wider , probably deep dish JDM look ....

Edit (Just realised you cant to EOI) , I was hoping to try and get about $1400-$1500 for the lot or about $800 for the wheels and tyres and then about $700 for the Pirelli's..

okay so the tyres are actually Pirelli P7's and are 215/55 r17 94v http://www.collierautosport.net.au/forsale/tyres.jpg , I am after $600 for these Pirelli's which ends up $150 a corner, pretty good for Pirelli's huh ?

Then the rims are in pretty good knick, the car is parked in a akward spot so I could only grab a picture of one of the rims tonight (will update with more) but the two front have Altimax HP 215/45 r17's and the rears have Rapid p609 215/45 r17 with about 85% tread on the both . One of the rims pictured http://www.collierautosport.net.au/forsale/Rim.jpg . I am after $800 for the wheels as the tread on them is almost new and there is barely any gutter rash on these rims at all .

PM if your keen, I am interested in grabbing some cheap stockies if anybody is getting rid of some so the car has something to sit on if you buy the rims.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...