Jump to content
SAU Community

Recommended Posts

EOI: High mount 260rwkw @15 pounds R33:

Large Turbo (i think it is a XS power GT40 or 35: 15 pounds = 260 rwkw

Nismo Coil Overs,

larger Injectors and Fuel pump,

Q45 AFM

Greddy Emanage engine management,

Greddy Profec boost control evc

Front mount + front mount spray system

Greddy Blow off

Nizmo Coil overs (not height adjustable)

17 inch advanti rims

Better brakes with the abs disabled

the usual other goodies: sound system, turbo timer, remote start, viper alarm.

Only flaws are the front bar and the bonnet the paint could be slightly better and cracks in the front bar....

a QUICK CAR THAT DOES NOT SQUEEK........ PICS UP TOMORROW

Price $10k ono (i am open to reasonable offers)

Location: Adelaide Hills

Contact: Chris 0488236950 and [email protected]

Link to comment
https://www.sau.com.au/forums/topic/419022-eoi-fs-r33-260-rwkw-10k/
Share on other sites

  • 3 weeks later...

Hahaha... it's unfortunate that you're so frustrated over trying to sell it and I was interested in the specs and the possible 300rwkw but after seeing the pictures I just didn't find it aesthetically pleasing so i'm no longer interested. Starting to decide as well that i'm only going to upgrade to a GTR.

I thought I banned you from SAU for life Chris .... yet here you are under yet another alias .... I am now watching you - tread carefully.

  • 2 weeks later...

Has a dog box too...bit has a pretty cool wine and then pop when changing gears... ok guys I am just trying to see whether any one is keen on buying my stuff- car etc..... thanks for the bumps anyway...

Did any one go on that imfs cruise last night? My turbo gasket has gone so I did not go along, plus it started all thevway out north in scumsville heheh

Good to hear from you again nightcrawler..... I wish I had kept those bildsteins that I bought from you six years ago..... I need some stiffer coil overs....

You have a few more titles now...... fast on yiur way to sau royalty hehehe

  • 2 weeks later...

No, $2.5k as you would almost NEVER get it off defect here in SA (Regency Park here are absolute assholes - it would cost you more than $2.5k to stock it out to get it off defect and refit the mods - gearbox change, turbo/manifold change, original fuel pump back in, original ECU back in, Viper alarm out, turbo timer out, boost controller out, coilovers back to stock, oil cooler out, etc etc - they pick on EVERYTHING - in fact you would most liekyl come out of Regency Park with a significantly bigger list than when you went in (common)) - and it would be a HUGE headache to get it off defect in another state with SA rego.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...