Jump to content
SAU Community

Recommended Posts

Hi Guys,

Selling R34 Suspension that came off my R34 VS2 Nur with Mine's Eibach Springs. They are ~30 - 35mm for the fronts and ~15 - 20mm for rears as compared to normal height. The ride felt perfect with these on without being soft but a nice firm feel.

They are in excellent condition and Centreline Suspension can vouch for these too since they fitted my brand new coiloves and a few other goodies.

http://www.centrelin...ts-a-jdm-world/

Selling $400 for the whole lot. The springs alone brand new are worth around $450 - 500 brand new.

Pick up only (Location North East Suburbs Melbourne) unless you organise postage on your own because they are large items.

Pics below:

13020001.jpg

13020003.jpg

13020004.jpg

13020005.jpg

13020006.jpg

I believe the GTR front height is different to the GTT so the rears would fit but not the fronts. not sure if correct, this is based off what i read (which i only vaguely remember) from reading a bilstein shocks thread recently.

so as much as i'd like to grab these off you, i also have a GTT (2 door) though, so it would require a fair bit of work to re-valve or whatever to get these to fit properly.

They can fit but as what you said Chris, rears would be fine and fronts will have some issues. The GTR fronts have higher spring rates, and the strut lengths are different causing the front of the GTT to be low and the rears to sit higher

I think there's someone in WtB who'd want these.

And freight on a pallet interstate would probably cost about $80 > less via eGo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...