Jump to content
SAU Community

Recommended Posts

For sale is my Beloved series 2 GTT with only 80,000km, i am the first and only owner of this car in australia.

This car is one of a kind and a real head turner, having a genuine gtr front end mold perfectly to the gtt body
This is a very regretfull sale but i need the money for a house.
All the work that has been done on it was done by myself other than the tune and custom exhaust work.
Has been serviced every 5k since i got it at 49000 from japan. with spark plugs replaced every 10k.
It has been tuned at unigroup engineering pulling 270KW at 20psi. Still has 6mths warranty on the tune.
over 20k has been spent on this car, around 5k was spent on the stereo alone.
Also has 10 months rego

Number plate is RST.15S spelling restless

Looking for $25k ono, no time wasters, car is located in old toongabbie, nsw

contact James on 0422647656 for enquiries


Body:
R34 GTR front end conversion, all genuine parts were used besides the bonnet
GTR alloy guards
GTR plastic bumper with grills
GTR carbon fibre non genuine bonnet
Tein gas bonnet struts
Rear bumper and side skirts are geniune nissan altia/aero body kit
the side skirts have been modified to meet up with the gtr guards
Seats are Genuine Recaro SR3 Trail series with genuine Bride rails

Nismo gear nob


Suspension:
White line heavy duty sway bars front and rear
BC racing coilover height and dampening adjustable suspension
Rear hicas lock bar installed, hicas motor will be supplied with sale
Wheels are rota. front: 18x9.5" Rear: 18x10" with different offsets to fill the guards


Motor:
custom 3" exhaust from turbo to cat, with a xforce cat and catback
JJR front mount return flow intercooler
Nismo in tank high flow fuel pump
Sard 650cc fuel injectors
Splitfire coil packs
Nismo low temp thermostat
Genuine Koyo full aluminium Radiator
Garrett GTX3076r with 0.62 ex gated 4bolt exhaust housing
Tial 38mm external wastegate with 10p spring, piped into exhaust
Greddy oil cooler with sandwich plate and braided lines
Magnetic sump plug
K&N panel filter, also will supply Apexi pod filter
Shortened Shifter

Electronics:
HKS EVC 6 electronic boost controller
HKS turbo timer
Apexi Power FC with hand controller in glove box


Stereo:
Pioneer dvd player with ipod control cable in glove box
Rockford Fosgate full system includes
Splits front and rear
2x amps one for sub and one for speakers
T2 rockford fosgate subwoofer in custom fibreglass enclosure
Capacitor to keep the sound up with heavy bass

post-69199-0-45475300-1361059907_thumb.jpg

post-69199-0-32973700-1361059941_thumb.jpg

post-69199-0-62681600-1361059978_thumb.jpg

post-69199-0-60861400-1361060005_thumb.jpg

post-69199-0-00041800-1361060025_thumb.jpg

post-69199-0-68615500-1361060063_thumb.jpg

post-69199-0-37966700-1361060099_thumb.jpg

post-69199-0-17491500-1361060122_thumb.jpg

post-69199-0-51715900-1361060148_thumb.jpg

post-69199-0-36707000-1361060169_thumb.jpg

post-69199-0-08315700-1361060197_thumb.jpg

post-69199-0-62273800-1361060229_thumb.jpg

post-69199-0-42167300-1361060295_thumb.jpg

post-69199-0-67597500-1361060367_thumb.jpg

post-69199-0-70838600-1361060400_thumb.jpg

  • 2 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...