Jump to content
SAU Community

Recommended Posts

Only recently got this bonnet but I'm looking to swap back to the factory bonnet,
from the pictures you will be able to see that it's in fantastic condition, no
scratches or sun blemishes, my car is kept garaged at all times, It not driven
at all I have had no license for as long as I have been in possession of the
bonnet.

The bonnet has an intake for cold air above the turbo and 3 outlets for heat dispersion,
the bonnet also comes with a N1 lip.

The only issue with it is the chip out of the underside shown in the picture.


I'm looking for a straight swap preferably with someone who has the same colour as
my car.

I live in NSW also



bonnet4.jpg

bonnet1.jpg

bonnet2.jpg

bonnet6.jpg

bonnetcrack.jpg

Edited by geetea-are

I'll see how I go, but if I dont find some one to swap ill sell,

do you not have a bonnet you want to swap

i also want to keep my stock to swap on.

and its colour matched to a non factory colour.

good luck, if it doesnt come through( i reckon it will), let me know.

I've got a white stock bonnet I'm willing to swap, it's in pretty good condition.

Is it full carbon, Dry or wet? or is it one of those FRP ones with a carbon top on the thing?

im interested, where about in NSW are you.

My bonnet is yellow and in 100% perfect nick. let me know if you keen, i live 4 hrs west of sydney but have no problem coming to you.

Hey buddy

Ive got a silver perfect 32 gtr bonnet ill swap ya if the deal falls throu Im in sydney

Cheers

Memphis

Ahhhhhhhh!! Damn, that would of been perfect, I'm pretty sure he's very keen, he's driving 3 hrs

I take it this will one day get me defected if driving on public roads? Im super keen is there any way to make it legal?

yes, defected.

so far as i know, no way to make it leagal yet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...