Jump to content
SAU Community

Rb25Neo Upgrades

elleNEO

By elleNEO,
in General Automotive Discussion

 Share

Recommended Posts

elleNEO Rookie

elleNEO

Posted
Posted

Hey Guys,

I'm a new RB owner and I am hoping to upgrade my computer as the car need a tune. I need some advice on the brands of ECU's I can get, nothing fancy as the car is my daily. I've heard PowerFC is okay? Please help :)

Cheers, Ell

Link to comment
https://www.sau.com.au/forums/topic/420518-rb25neo-upgrades/
Share on other sites
  • 6 months later...
mad082 Grand Master

mad082

Posted
Posted

Heya,

If you have a lil extra to play with check out the Link G4.

On it's own it will make a big difference - but then i'm guessing you've got something already :)

An ecu is only as good as the person who tunes it. And if you were to put the same tune into a pfc as a link you won't see any difference.
Ares180BPM Explorer

Ares180BPM

Posted
Posted

Will disagree - I've seen the results of moving the same setup from a PFC to a Link G4 Plug in.

The results were massive.

PFC is effectively a factory ECU that's been unlocked, as opposed to the Link, being far more advanced (anti-lag, launch control and all sorts of other goodies)

I do agree that a great ECU with a shite tune is never good, however there are limits to what some ECU's can handle.

mad082 Grand Master

mad082

Posted
Posted

Anti-lag, etc has nothing to do with how a car performs because of the tune though. Setup 2 ecu with the exact same tune and they will perform pretty much the same. If you got massive performance gains from changing ecu then the tune wasn't the same. At any given point of the map there is only 1 ideal setting it should be at and it doesn't much matter what ecu is saying how much fuel to go in, or when to fire the spark plugs, as long as they say the right thing at the right time. sure some ecu's allow finer tuning than others, but not to the point of being massively different (unless you are at the limits of an ecu because of other factors such as it needing afms instead of a map sensor, etc). Sure you may have had an experience that says otherwise, but that doesn't change the physics behind it all.

And the pfc isn't just an unlocked stock ecu. It only really has 1 map (2 if you want to get technical, but 1 is fuel, 1 is ignition). The stock ecu has many more (or at least a nistune does).

  • 1 month later...
Ares180BPM Explorer

Ares180BPM

Posted
Posted

Heya,

tuning a 34 GT-T can be VERY costly.
Make sure you kow where you want to go from DAY ONE - have a rough power figure in mind and aim to work towards it.

Re: ECU - for heavy modification, i'd recommend a G4 over a PFC. I've had both and whilst the PFC was ok for light modification, if you're wanting to go over the top, it simply doesn't keep up.

Main things to consider before slapping a bigger turbo on and saying done - cooling (GET AN OIL COOLER) fuel and ignition.
Splitfire coils, properly gapped plugs, uprated injectors and pump and a pressure regulator are what you need to be thinking about prior to manifold wastegate and intercooler.

I built my GT-T over several years, and wasted a lot of money on bad advice from the wrong people. Find someone who you can trust and half the battle is won.

Posted a link below to the final build, it makes around 290rkw - doesn't sound like much but with the amount of torque and how light it is, it goes pretty damn hard.

http://social.nengun.com/member/ares/my-daily-gtt

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...