Jump to content
SAU Community

Skylines vs Supras at wakefield

sprinterboy
 Share

Recommended Posts

LTSJayce Veteran

LTSJayce

Posted
Posted
dude it's already been and happened on that actual date 5th june.

at moment me scanning the wakefield website for any open track days during the weekend.......... none at the moment.

Dammit...By the time you posted #19,it was already past the day!Ah,well...So,the question remains:WHO WON?!And how's you go,G.?

whytry Collaborator

whytry

Posted
Posted

sat was THE day as not many peples there, had the track all to myself at one time.

was excellent weather (not cold, but fairly warm) had a friend teach me the 'lines' so that i could get a better time. so far i'm in the low 1:14s to high 1:13s not bad but still got a looong way to go yet, as the clutch was slipping. (i know i know haven't replaced the clutch yet) but i did get to 'bed' in the new brake system i had installed 2 days earlier, put it this way they were smoking nice 'n' good whenever i pitted in.

sun was good too (again with weather) but there were too many classes (and racers) which restricted my time on the track, (i think i went on a total of 3-4 times) had some fun embarrassing a holden 300kw monaro coupe, and one of those NASCAR cars that you can hire for the day to race. overtook both cars on the staright with the clutch screaming and revs going in the red zone, nedless to say they weren't happy. then i got demolished myself by a wrx and an mr2 they past me as if i was standing still, at that time i think the clutch had enough.

looking forward to the next meet. i'll let you know ltsjayce and the rest of the skyline peps on this forum.

whytry Collaborator

whytry

Posted
Posted

i think he is mostly concerned bout 1/4 mile runs than circuit races, thus he might have to set up the car for circuit. ie: stiffen up the suspension, and anything else for it to handle around a circuit.

i could be wrong though, haven't seen or talked to him for a while.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...