Jump to content
SAU Community

R33 Gtr Shell And All Parts For Sale Again, Also Lots Of Aftermarket Parts

spenda
 Share

Recommended Posts

spenda Collaborator

spenda

Posted
Posted
hey guys


selling off my project car r33 gtr i only really just bought it but have moved onto an r35 haha.. cant afford both, especially with r35 parts being as expensive as they are.


ALL PARTS LOCATED IN MACKAY NTH QLD, POSTAGE CAN BE ARRANGED


I CAN ALSO POSSIBLY TRANSPORT THE SHELL TO BRISBANE OR NEAR THERE PROVIDED I HAVEN'T SOLD THE WHEELS OR ANYTHING ELSE TO MAKE IT DEMOBILISED!! WILL ALSO NEED A MONTHS NOTICE AS ITS A 1000KM DRIVE AND NEED TO ORGANISE A TRAILER OFF MY MATE..


R33 Gtr mnp shell it is complied and DID have rego a couple years ago (nur33's old shell) - $1500


  • Front windscreen cracked
  • Stripped interior, not one bit of wiring harness front to rear
  • Front guards modified as per picture
  • Custom dash reo bar made
  • Custom alloy dash made
  • Sound deadening partially removed - just the stuff i could get with dry ice.. Some still baked on like around the gbox tunnel
  • Front radiator support cut out - was planning on welding a couple tabs to it then bolting it back on via the tabs
  • Lower front chassis brace cut out and replaced with a piece of tube to give the radiator more room and be able to have the intercoler sit upside down and have its inlet and outlet very close to the intake mani and turbo for short piping.
  • all fuel and brake lines have been removed
  • aerocatch bonnet pins
  • led taillights
  • will throw in the whole car loom and all ecus that i have.. loom is cut in a few spots and one ecu is damaged.
  • NO DIFF!!


additional parts to suit.. if you buy the shell the below parts will come at a discount depending on what it is you want.



  • r33 gtr BC External Reservior coils, as new only fitted and moved 50metres - $1350
  • r33 gtr black oem front bar, good condition paint is scratched a bit - $500
  • r33 gtr/gtst greddy front strut brace - $125
  • r33 gtr carbon fibre grill with no symbol just mesh - $100
  • r33 gtr rear wing, carbon end caps - $350
  • r33 gtr front lights very good condition - $350
  • r33 gtr/gtst cusco hicas lockout bars very good condition - $250
  • r33 gtr cusco front swaybar - $250
  • r33 gtr moonface racing castor arms - $200
  • r33 gtr passenger seat, good condition - $250
  • r33 gtr front drive shafts - $400
  • r33 gtr rear driveshafts - $500
  • r33 gtr front propshaft - $150
  • r33 gtr main propshaft - $300
  • r33 gtr rear strut tower/boot bracing, not the bar that goes from tower to tower but the bracing that bolts to the strut tower and boot floor - $150
  • r33 gtr bonnet, mnp with genuine uras bonnet vent - $450
  • r33 gtr interior panels, have a whole bunch of them, pretty much only threw out everything in the back half of the car and the dash - not sure what condition it is all in these days so if you want something i will have a look and see if its there then get back to you with a price.

Aftermarket Stuff


  • GTR Trust Drag intercooler 600x300x150mm, VGC, part of the end tanks chopped off for the different orientation i was planning while running it upside down - $1900
  • Stack 8130 dash - excellent condition has all loom, oil pressure and one temp sensor.. needs one more temp sensor to complete it - $1450
  • Full Set r34 gtr standard brakes with slotted front and rear rotors, rotors have been painted to keep rust off - $2000
  • AME TM-02 wheels, 18x10+15 all corners on 1000km old achillies 123s semis 265x35x18 - all very good condition no gutter rash - $2300
  • rochester 14mm 1200cc injectors x 4, never been used only fitted - $400
  • buddy club fixed back seat, has rail to suit s13/4/5. black with grey inserts for a normal sized person, has a small tear in the fabric other than that its as new - $450
  • sr20vet mazworx lhd or RHD without brake booster intake manifold, no fuel rail as new condition just needs a throttle cable bracket welded on - $500
  • s13 whiteline front swaybar good condition - $125
  • S14/15 K.L.S camber arms - $85
  • 2jz exhaust manifold 3d flange ready to make a manifold - $100



thats it for now..


please contact me (spencer) on 0413347774 or via pm
spenda Collaborator

spenda

Posted
  • Author
Posted

as requested, a picture of the bonnet. only one i have thats half decent.. i can get some better ones on the dslr tomorrow if you want? bit dark atm

also has aerocatch bonnet pins fitted now instead of the ones pictured and forgot to mention the n1 lip

DSC_0001-1.jpg

spenda Collaborator

spenda

Posted
  • Author
Posted

Hey

So far the rear driveshafts are gone and front bar, had intrest in the suspension and most likely sold the brake master cylinder.. Other than that it is still how it looks in that picture minus the autoselect lip..

Send me a pm and we can work a price out depending on what you want to come with it..

  • 2 weeks later...
  • 3 weeks later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...