Jump to content
SAU Community

Recommended Posts

Car has been sitting there for 4 months start it up. Slight knocking noise

Dump the oil change the filter add some lifter stuff as that was first thought a stuck lifter.

Still same noise but louder

Here's the list of things we checked

Water pump- took belt of so it wasn't spinning

Spark- took spark plugs out and turned it by hand

Coil- unplugged the coils one by one. Still there

Turned it over by hand.

Cam covers off. Took off, spun by hand then started it without the cam covers, no issue

Injectors - took injectors off, unplugged one by one sound still there

Also removed cam covers and ran the car. Knock is definitely lower down then cams

My knock

Video that covinved me

So, anyone have any ideas ?

Link to comment
https://www.sau.com.au/forums/topic/422052-rb25-knock/
Share on other sites

It doesn't sound like a spun bearing to me. More like lifter noise. Probably since the car has been sitting for so long the lifters are gummed up and there isn't the right amount of oil in the hydraulic lifters. You can take them out, take them appart and clean them then re assemble with some oil in them. there is a thread on here in the DIY section of how to do it.

Link to comment
https://www.sau.com.au/forums/topic/422052-rb25-knock/#findComment-6791128
Share on other sites

I reckon he stated man that lifter stuff has been added, Death rattles for me have always sounded alot worse than that to me. While it doesnt sound very healthy and could possibilly be a spun bearing i would check these things

1. check compression, should be all even and around 150psi

2. It sort of sounded like a leaking exhaust manifold gasket from the video so maybe check that

3. If its got fresh oil and the lifters are the problem try driving around gently and see if the problem perists, if it gets better chances are it was just lifters :)

Link to comment
https://www.sau.com.au/forums/topic/422052-rb25-knock/#findComment-6792144
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...