Jump to content
SAU Community

Diff Lock Issue On My 32 Gtr

ZILL4R

By ZILL4R,
in General Automotive Discussion

 Share

Recommended Posts

ZILL4R Newbie

ZILL4R

Posted
Posted (edited)

Hi all

I need your help?

Just recently every time i turn my 32gtr 1989 model AWD starts to lock up the diff and is very hard to make it move where i have to over rev engine to get some movement, could anyone help who has had the same problem or has an answer on what i should do?

Edited by ZILL4R
Link to comment
https://www.sau.com.au/forums/topic/422199-diff-lock-issue-on-my-32-gtr/
Share on other sites
ZILL4R Newbie

ZILL4R

Posted
  • Author
Posted

hi guys ok so i decided to do a bit more investigation on this so i got in the car with a mate and took it for a drive and after giving it a hit a few times to warm up the diff and gear box we went to a empty industrial road and started to turn the car. I steped outside to see if it woul lok up but all i saw was that the when you stop the car and take off and turn it shudders but the rear and front wheels move normal.

I have been advised that because i have a jim berry Full monty that the clutch is a Brass button and when it heats up on the fly it tends to shudder

I am lost now guys not to sure what it could be is there any ideas ?

mad082 Grand Master

mad082

Posted
Posted

so you are saying that you have to rev the car harder to get it to move? it could be one of a few issues. it could be a siezed brake (or hand brake), diff issue or clutch/gearbox issue. might be worth starting by jacking the car up and seeing how easy it is to spin each of the wheels. that may also help you isolate whether it's front or rear diffs causing the issue (if there is a diff issue).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...