Jump to content
SAU Community

Recommended Posts

RB30 is my dream engine

one of those forged bottom end with Rb26 head and HKS V cam (vvti) + a pair of GT-RS...  

have to stop dreaming!

Is that all?

Yeah i'd love a RB30 Hybrid, i know a guy that did the conversion in a 32 one of me mates saw it take off with the exhaust scrapin along the ground at gear changes so much power!

Nice, so when does she drive?
Well due to some stuffing around with the intercooler kit (u know what i mean by great Australian quality Steve :() i have to wait a couple of weeks for it to be exchanged for a new kit....fkn hell :D

so yer its in, gotta plug it all up - or might just leave it to Shaun if i gets lazy :wassup:

the sr20 auto gearbox xmember was a no go though...have to ring James and see if he can get an rb20 auto one to see if it fits

But at least its in.....3 hours later. Didn't do too bad considering we dropped the rb20 in with all manifolds, turbo, and r33 gearbox attached in the one hit :)

edit/ were u at D1 about 3 weeks ago Steve? I was the one buying the last mission mount they had on display, and a x member for the r33 box. Rob, and James were there with the D1 on the tv??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...