Jump to content
SAU Community

Recommended Posts

VIC: R33 RB25DET S1.5 273RWKR ENGINE

Since getting a work car 4 years ago my skyline has sat under cover in the driveway and only done 1000k’s or so. With it costing reg and insurance it’s time to sell it up and move on to the next hobby. I’m looking to break it up starting with the engine only seeing as it’s worth the most (over $10,000 in receipts spent on toughening it up).

It’s a strong, well maintained engine with oil and filter changed every 10K kms. It’s still in the car and running to be seen. It’s done 56K km since the rebuild (156K kms total on car). It did 600kms on the freeway each week for 2 and a half years so it’s been a pretty easy life since the rebuild.

Engine

RB25DET S1.5

Power

273rwkw (with dyno sheet)

Head

Ported & polished with angle cut valves and Tomei head gasket

Pistons

Forged - Venolia USA

Cylinders

Machined and sleeved

Rods

Shot peen strengthened

Crank

GTR

Injectors

Denso 740cc

Airflow meter

Q45 Infinity AFM

Air filter

Pod – could do with replacing

Turbo

Custom: Ball bearing: Equivalent to GT2876R? Compressor – A/R 0.70, HKS exhaust housing – A/R 0.64.

Wategate

Internal

BOV

GReddy

Boost controller

Simple bleed valve

ECU

Power FC tuned rich for the motors longevity

Asking $3,900 for all of the above. Negotiable and may break further depending on interest.

Once the motor’s SOLD the rest of the goodies in the car will appear here…

  • Gearbox with short shift kit / full drivetrain.
  • Impul light weight racing rims (17in white 5 spoke).
  • GTR rear spoiler / Veilside pods / skirts.
  • Full black coloured body with resprayed roof and bonnet.
  • Blitz 3in catback exhaust / x-force dump-front pipe.
  • Apexi intercooler.
  • Recaro seats.
  • Nizmo 300km/h dash cluster.

OR…. $8,400 for the whole car as is.

post-7819-0-77955100-1364472330_thumb.jpg

post-7819-0-40761500-1364472937_thumb.jpg

post-7819-0-52411700-1364472970_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/422534-vic-r33-rb25det-s15-273rwkr-engine/
Share on other sites

Motor's still available. Some interst but not enough to break it up into single pieces.

Any reasonable offers considered but please no timewasting dreamers because I won't be given away for what it is.

  • 1 month later...

It's begun......

Deposit taken on the motor in pieces.

Still for sale are injectors, Power FC (no controller), BOV, turbo, dump/front pipe etc...

Anything required to keep it rolling will not be for sale "yet".

Just being dismantled so prices to come.

Reasonable offer considered in the mean time.

  • 3 weeks later...

Hi guys,

I'm after $650 for the power fc without a hand controller.

The cluster I'm after $350. The tacho is playing up but the price is purely for the nizmo speedo as part of the cluster.

Cluster pics are in the post from when it was going to get sold as a car:

http://www.skylinesaustralia.com/forums/topic/422952-vic-r33-gtst-95-s15-273rwkr/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...