Jump to content
SAU Community

Recommended Posts

Hey Guys

Got some R32 and R33 GTR parts sitting in my shed that need to go.

Contact details: PM or reply here

Cheers Greg

6 x 700cc power enterprise top feed 11mm same as sard injectors just in a different box. Only done a couple of runs on the dyno before they were replaced with larger id1000's. $500 including postage. Pic

R33 GTR Vspec rear subframe, come with diff, hubs, arms and handbrake setup, no calipers, rotors, swaybar, half shafts $400

R32 GTR front diff, 4.11 ratio inlcudes everything pictured $100 Pic

R32 GTR BOV return pipe that runs behind the intercooler, no cracks $25

R32 GTR engine mounts $25

R32 GTR strut brace $50 Pic

R32 GTR front uprights, includes uprights, hubs, half shafts and lower control arms $100 Pic

R32 GTR slave cylinder $20

R32 GTR clutch booster and master cylinder $40

R32 GTR speedo cable $25

R32 GTR front sub frame and swaybar $50

R32 GTR power steering reservoir $5

R32 RB26 fuel rail $5

Link to comment
https://www.sau.com.au/forums/topic/422598-rb26-and-gtr-parts/
Share on other sites

Couple more things added

HKS low mount cast manifold, bought this about 3 years ago then changed plans and it has just been sitting around in bubble wrap. It has a crack between the dividing plate as you can see the in pictures $550 including postage

IMGP1129.jpg

IMGP1131.jpg

IMGP1132.jpg

IMGP1133.jpg

IMGP1134.jpg

R32 lock bar $40 IMGP1137.jpg

  • 3 weeks later...


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...