There Is A Hole In My Hub Assembly With A O Ring On It (Pics). What Goes In There? Need Answer By Tmw

[sonicz]

I noticed there is a hole that leads to hub mechanism inside.

Can I fill them with a liquid lubricant, Something like liquid MOs2 (molybdenum disulfide).

What connects to that hole?

[Victory]

That is where the senser for the ABS attaches to.

I have simply made up a plate to cover the hole and attached it wth a bolt to keep it in place.

[sonicz]

Thanks for the info.

I got these to replace my parts, a direct swap, they are of a 96 gts-t, but my car, also a gts-t has no abs.

Can they still be fitted without problems?

Does that hole lead to the bearings? I want to pour some lubricant in in there. Not made for bearings but for bike chains etc. it has mos2 in it and i find it works well.

Edited April 9, 2013 by sonicz

[MrStabby]

Does that hole lead to the bearings? I want to pour some lubricant in in there. Not made for bearings but for bike chains etc. it has mos2 in it and i find it works well.

The sensor points at a slotted wheel which you can see when you look down the hole. The bearings will be behind seals so i think you'd just make a mess if you pour lube down there.

[sonicz]

Ok so I pour nothing in there, but I have to seal up the hole obviously before fitting them? Otherwise debris will get inside as there is a spinning cog linked to the wheel bearing inside.

[boostn0199]

JuSt cover it race tape ive had mine like that for 2 yeRs