Jump to content
SAU Community

Is Motorsport

rooney1980

By rooney1980,
in General Maintenance

 Share

Recommended Posts

rooney1980 Rookie

rooney1980

Posted
Posted

Ok so IS Motorsport in Rockdale, MASSIVE PLUG for them, I broke down on monday near parramatta with a big idling and boost issue. I got recovered to them with no notice to to them at all, I have picked up the car today after it needed a new fuel pump and boost leaks were discovered after a smoke test.

They dynoed it and came up with 246kw at wheel with 12psi boost. The car now drives 100% and again is enjoyable to drive!

If any of you guys near sydney need someone they can trust these are definetly the guys!!!

Link to comment
https://www.sau.com.au/forums/topic/423409-is-motorsport/
Share on other sites
  • 4 months later...
MrRx7s3 Mentor

MrRx7s3

Posted
Posted

I can vouch for them too, Indy really knows his thing when it comes to skylines and evo's, I don't and wouldn't go anywhere else, and he'll never rip you off and will explain everything to you no matter how annoying you are with questions haha lol.

Link to comment
https://www.sau.com.au/forums/topic/423409-is-motorsport/#findComment-7014603
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...