Jump to content
SAU Community

Recommended Posts

Wanted to keep these but can't hang onto these parts and not use them.

These are V8 Supercar Alcons control calipers, front pair only. Those who know are aware that these are some of the best calipers money can buy, forged monoblock design they are very strong and very light. You can't help but smile every time you look at them.

Will accept a Ø380mm x 36mm thick rotor and 25mm thick pads. They have the typical cosmetic scratches but that is to be expected with used parts such as these; they do not need a rebuild they are in perfect servicable condition.

Price is $2k firm for SAU members. Can post at buyer expense, contact via phone preferred.

Thanks, Mike

0407 801 338

post-48167-0-18718000-1365899168_thumb.jpg

post-48167-0-19255200-1365899177_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/423517-v8-supercar-alcons-front-pair-2k/
Share on other sites

what size wheel did you have on your car?

I have TE37SL but they will fit under Enkei RPF1 in 18x10.5 with GTR offset, they can be had cheap from traders on the forum.

Not sure what other wheels would work, there would surely be others.

Hey Mike, whoever bought these, would they like a set of four pot rears that would match up nicely with these? I have a spare set that im willing to part with.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...