Jump to content
SAU Community

S A U - N S W Texikhana - Queen's Birthday Holiday Monday


Recommended Posts

ugh more maps to setup

I have suggestions. Figure 8 skidpan. I can draw it for you if you like? ;op

Also... something that requires entering a largish circle, and going around it a few times, and optionally indicating to exit it. ;o)

ah yeah sorry forgot to respond. yours is fine :)

busy at work as per usual.

No problem at all, as long as you have it i am happy ;)

Did a quick read

If I never done a SAU day but have cams L2 licence how much do I need to pay

Are fire extinguishers mandatory? Due to the no gate rule will bring out the V35 instead of the 14 but dont really want to be hacking that up to mount an extinguisher

As per facebook thread, yes to extinguisher. Read the "first timers" thread linked in the first post for all the details of what you need. (helmet, extinguisher etc)

shouldn't be much if any hassle fitting a fire extinguisher.

how is the bottom part of the back seat held down on a v35, is there a bolt?

if not, you can use a simple piece of aluminium between the passenger seat bolts like we did in the leaf.

leaf_extinguisher2.jpg

randy, facewhatnow?

Oh I paid full amount & I'm a first timer.

Don't mind paying the full, might be bringing my girlfriend along for some passenger rides, can my extra tenner cover that too?

Ha! Nice one man!

Yeah, I'm going to give my wife a couple of rides. And happy to take any other passengers though the day! If I don't break it early!

Innapropriate for an SAU day, but hey i support it :woot: lolz

Considering how bad my driving is, There's every chance I'll be going home a single man.

This would not surprise me :laugh:

I'll be bringing down a gopro 3 on the day as well so i'll be looking for volunteers for car footage :)

If you put it on FeZ25s car put it away from the roof as that's where the car will end up lolz

Guest
This topic is now closed to further replies.



  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...