Jump to content
SAU Community

Recommended Posts

So went to the Friday night drifts and was having a pretty good time, car was running well

Was finishing off my 285s and had some stock wheels to drive home on

Anyhow I had a spin which didn't seem all that different to any other times I have had the car spin out on the track over the last few years until I got back on the track and realized something was not right

At 1st I thought I may have popped a tyre as the steering wheel was turned a quarter turn to the right in order to drive straight. I limped off the track to discover that my tyres were ok, however something was very wrong with the back left wheel as you will see in the pics

Pulled the wheel off and had a look, seems like I have bent some rod that has caused the wheel to toe in + also screw up the camber

Put the wheel back on and checked to see that it was not fouling on anything when it turned and that it was tight had no play in it and was not wobbling

Drove the car around the block and it seemed derivable so I went back home at 80kph on the hwy

Surprisingly the car still drives pretty straight, the steering wheel seems to correct the cars direction by moving itself a quarter turn right

Have posted pics of how the wheel is sitting inside the guard

Have also posted a pic of the rod that I think I have managed to bend on the left side along with a picture of the rod on the right side which looks a lot straighrer

Can anyone tell me the name of the rod I have bent and any ideas on what options I have to get this sorted? Might be calling up the wrecker in Victoria that had a few V35s for parts or are there aftermarket items available?

post-9102-0-04199000-1366373115_thumb.jpg straight

post-9102-0-96278300-1366373129_thumb.jpg bent

post-9102-0-37900700-1366373029_thumb.jpg got toe in?

post-9102-0-34766400-1366373072_thumb.jpg

post-9102-0-16468000-1366373103_thumb.jpg

I'm 99% sure its the toe/traction rod/arm whatever you want to call it, I'm hoping that I don't need to get camber arms as well

Now as I am trying to keep the car as roadworthy and defect free as possible dose anyone know what the deal is in QLD about rose joints?

I'm pretty sure years ago when I took my 180sx to the pits after it got defected I had to swap out my aftermarket castor rods for the stock ones as they got knocked back for having rose joints

Had a look at the Queensland transport website but was not able to find anything specific, can probably call them up on Monday to find out for sure but in the mean time if anyone knows

pretty sure that these ones from just jap are rose joints

http://justjap.com/store/product.php?productid=16572&cat=&page=2

these ones on ebay look more like urethane/rubber

http://www.ebay.com.au/itm/Adjustable-Nissan-350Z-Z33-Infiniti-G35-03-08-Rear-TOE-Control-Arm-Bar-Rod-Kit-/271115167760?pt=AU_Car_Parts_Accessories&hash=item3f1fb92810&_uhb=1

  • 2 weeks later...

I would highly recommend going over the alloy subframe with a fine tooth comb to look for damage.

Check ALL welds and all sections carefully for cracks or stresses.

Also have a think about the arms you put back in; if you use stronger ones they will no longer be the "fusible link" in the chassis and you may destroy the subframe instead.

I had a decent look under the car when it was on the hoist everything appears to be fine

The new toe rods and camber arms were a fair bit heavier than the stock items so I agree with your fusible link comment

Camber arms were fine but I had adjustable ones put in at the same time just in case

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...