Jump to content
SAU Community

Recommended Posts

Je forged pistons and rods great condition 20thou oversized $450

Rb26dett block no cracks etc $250

Rb26 complete head ready to bolt onto block complete with covers etc $1200

R33 Gtr injectors rb26 with rail great condition recently cleaned $230

Rb26 intake plenum, throttle bodies and adapter plate $280

Rb26 brand new water pump new in the box $60

Rb25 rb26 aftermarket alternator Bosch $70

Rb26 r33 crank long snout $350

Rb26 sump with diff $150

Rb26 diff modified to suit rwd $150

R34 Gtr ball bearing turbos complete with complete turbo side great condition $500

Rb26 balancer small chip but is still fine $30

Rb26 turbo oil and water lines $40

Rb26 engine brackets $20

Rb26 acc valve $50

Rb26 idle reg $50

Rb26 rods $50

Rb26 pistons $50

R32 Gtr Coilpack harness great condition $50

Rb26 Coilpack valley cover $80

R32 Gtr air con condenser $50

Many more engine parts available

Gold Coast

0487924497

Please text or call

Edited by toy515
  • Like 3
  • 2 weeks later...
  • 4 weeks later...

Hi i'm interested in the rb2b26dett head , rb26 plenium, throttle body and adapter plate if they are still available. please send pics to my forum email address thank you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...