Jump to content
SAU Community

Recommended Posts

Twin Turbo Z32

Just had 100,000 KM service done along with a bunch of other stuff, new iridium plugs, fresh tune, etc etc. Compression is a healthy 155-165 across the board, tests more than welcome. All under plenum water bypasses done etc.


Interior is perfect, exterior is great.

Front bar freshly resprayed

Haltech EllV2 ecu
Haltech boost solenoid
FMIC
42mm radiator
Adjustable fuel pressure reg
040 fuel pump
New engine mounts
Silicone intake pipes
2 1/2" twin exhaust out of dumps into single 3" exhaust from cat back to a 5" cannon
UAS braided clutch line
Air con has been removed, along with a lot of other non used items that have been suggested for removal to decrease the weight of the car, would guess it's around the 1350-1400kg mark in full street trim now.

Full tein suspension, height adjustable coilovers, all bushes, tension rods
HICAS elimination bar
Rear subframe bushes
Adjustable camber bolts
Single piece tailshaft from driveline services
4 brand new 235/35/19 tyres, space saver in the boot

Alpine 7" touch screen dvd/cd player
Alpine 6 1/2 tyre r front speakers
Infinity 4x6 rear speakers
Sony 500w 4 channel amp
HKS turbo timer
Garrett boost gauge and speco water temp gauge
Oil Pressure gauge
Optima red top dry cell battery relocated to the boot in a battery box

Car was tuned at Millennium Motorsports on a mainline dyno which reads lower than other dynos so I'm told. The car made 213rwkw and 517nm of torque on 13 PSI with stock turbos and injectors on a very safe tune. All supporting mods here for a nice amount of power, just add turbos, dumps and Injectors for 300+ RWKW if that's your thing.

Consider swaps for a 180sx or something more suited to drifting.

Would also consider swaps for an S15, big power GTS-T + cash your way (dependant on the car of course).

Pics:

E0C235EE-EF70-4C69-A1F1-5A58A072C8FE-139

6E738E88-8D22-4DFA-85C2-5DA36D3C1EA9-171

zedd_zps79e2c17f.jpg

46EB95D9-299F-4836-B50B-01F1621623A8-640

Car is located in Brisbane, happy to assist with interstate buyers. 0401029817

Link to comment
https://www.sau.com.au/forums/topic/424144-twin-turbo-300zx-lots-of-mods/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...