Jump to content
SAU Community

Recommended Posts

Hey guys,


I've decided to sell my Gloria as its time for a change,


So here it is:


2001 Nissan Gloria Ultima 76xxx kms

VQ30DET (single turbo)

4 speed auto (no CVT)

Serviced 2000km ago

Grey interior with woodgrain trim vinyl wrapped charcoal grey

Rear privacy glass - quite dark

Dual-zone climate control - front/left+right can be set to different temps

TV/navigation - not converted to aus

Driver + passenger airbags

Electric seats

Electric mirrors

Electric windows

Self closing boot

Power steering

ABS

Remote key-less entry with central locking

5 Months rego

Smooth quiet drive, good power, reliable


Car has a few mods as follows,


Jap Wheels, Blest Bahnsport Type D in 18x8+38 front and 18x9+35 rear.

Brand New Achilles ATR Sports front and rear.

BC Racing BR series (gold ones) Coilovers front and rear, usual base height, camber and rebound adjustment

Custom 3" stainless front pipe with deleted cat

Fujitsubo 3" stainless cat back exhaust with twin tips, Legalis R series so under legal noise limit

Custom front mount intercooler set up

New Alco battery

6000k low beam HID kit

All interior globes included cluster changed to white LED


It has an integrated screen in the dash for all in car display and comes with a translation guide as it is all in japanese, still very easy to use took me only a couple of days to get the hang of what all the buttons do. Car was imported in 2009 and i am the 2nd registered owner, it came to NSW from SA and to the best of my knowledge it is the only one in NSW, i have all the original import paper work and also all of the factory user manuals that came with the car. Body is in good nick few scratches but not too bad for a daily drive.


Open to offers and swaps with cash my way, so hit me up.


Asking $18,000.


Thanks Sam, 0432 228 214


861435_10151496957376211_993895610_o_zps[/url]


Before coils,

DSC01390.jpg

DSC01412.jpg

Coils,

DSC01408.jpg

Exhaust,

DSC_0132_zps88611b3a.jpg[/url]

DSC01424.jpg

DSC_0080.jpg

After coils,

DSC01421.jpg

DSC01422.jpg

DSC_0201.jpg

Dash,

DSC_0184.jpg

Interior,

DSC_0312.jpg

DSC_0311.jpg

DSC_0305.jpg

DSC_0129_zps772127b0.jpg[/url]
Link to comment
https://www.sau.com.au/forums/topic/424244-01-nissan-gloria/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...