Jump to content
SAU Community

Recommended Posts

FMIC are an odd one. Most people cut the front bar to fit the pipes. This makes them a nono. If yours is properly fitted with no hacking etc it should be fine.

That's right Sin, if you have changed/modified your chassis to fit a fmic it is defectable but if it fits correctly it is allowed hence the time role have passed through Dickson with fmic. However it the car had a top mount intercooler like WRX's you cannot have a fmic without engineering because your average skyline, Silvia etc has a forward facing intercooler outside the chassis frame oem. Same goes for turbo lasers where they are next to the engine.

I agree and disagree. Cutting the reo bar i agree with being a big no no but when i did it on my old r33 i took the car to a panel beater and ask if there was any issues with cutting a hole in the part near the wheel well and above the chassis to put the pipe through and got confirmation that part of the vehicle if cut will not change the integrity of the strength of the vehicle.

Any one else done the same?

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Dont rely on mechanics to get it right, read your adr's.

The adr's on your compliance plate are the ones you have to comply with.

Hole for pipe needs i think...

3mm reo plate, welded on 100-150 mm all sides from hole.

Something like that, cant remember details.

Not all rules make sense for specific purposes, some are there for general principals.

The hole in that spot on that car may not make the car any weaker, BUT, they want it done anyway cos they cant be that specific in the rules.

Dont rely on mechanics to get it right, read your adr's.

The adr's on your compliance plate are the ones you have to comply with.

Hole for pipe needs i think...

3mm reo plate, welded on 100-150 mm all sides from hole.

Something like that, cant remember details.

Not all rules make sense for specific purposes, some are there for general principals.

The hole in that spot on that car may not make the car any weaker, BUT, they want it done anyway cos they cant be that specific in the rules.

I've heard that since I did it. The car hasnt changed and still passes roadworthys.

I think they need to set the rules so that everything is the same.

Somethings are illegal on one vehicle and on another vehicle its legal.

Something to help people with the silly defects given to some modified cars on the side of the road. Namely Noise Tests on the side of the road.... Print this off and ensure that the officer at the time of the test follows the guidelines set out by the National Transport Commission of Australia. Note that this document specifically mentions the allowed equipment for noise tests angles and distances rpm for types of cars etc

http://www.ntc.gov.au/filemedia/Reports/NatStatExhaustNoiseTestSept2006.pdf

I will be adding up more soon but just advising that they are doing the same blitz through Westfield Woden at the moment and have confirmed with Westfield management that they are no allowed to be there unless invited by Westfield

I will be adding up more soon but just advising that they are doing the same blitz through Westfield Woden at the moment and have confirmed with Westfield management that they are no allowed to be there unless invited by Westfield

Did management confirm they HAD invited them? Your post is a little vague there :P

How about a $40 car cover?

They cant see sht then, they cant see rego or number plate.

Just cover your defects and rego when parking.

And some kind of alarm so they cant f&@k with it.

Or tiny locks so it cant be moved without breaking something, and if they do that....... well, you can imagine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not too sure just yet, want to have a go at doing what I can myself, but to start with want someone to cast their eye over it tell me what needs doing to get it running and back on the road, so anyone with great overall knowledge would be ideal.
    • I personally would go with cutting out the rubber. Then deal with getting sleeve off separately. Rubber can be painful to cut, it loves to jam up cutting tools. I normally have success with drill bits, deburr bits, angle grinders, jigsaw, reciprocating saw, and never forget... fire. Obviously different tools won't work in all locations you're trying to work with, and you need to be comfortable with each. You personally may be happy slowly slicing it out with a razor blade, if you are, go for it with one too! Feel free to wait for others to weigh in also on their thoughts.
    • So ... I got everything disconnected and started dropping the frame. Three of the four mounts started to come down but the fourth one (the one with the nut that gave me all the trouble) won't budge. The inner metal sleeve stays up tight against the chassis rail although the outer part of the mount drops a bit (and can be levered quite a lot more) but it's just stretching the rubber bushing. So I reckon there's some serious corrosion inside the inner sleeve and holding it tight to the lug at the top of the bolt. Tried everything I can think of so far: penetrating oil, whacking the top of the sleeve to vibrate it and wedge a screwdriver blade in there. I also tried to turn the inner sleeve a bit by hitting it with a chisel at the bottom. It's stuck solid. What do you think about cutting the rubber with a blade so I can drop the subframe around it anyway. Then worry about getting the inner sleeve off after? Will that work? Is it gonna give me even more problems?
    • Steam valve seals are usually responsible for cold start smoke, it goes away once engine warmed up. Disconnect it let engine breathers and let it breath freely, see if problem goes away after a short drive. Also check to make sure engine oil drain pipe is not blocked or kinked. 
    • Haha thanks! Yea I'm moving over from 2x 1000cc jets pre throttle over to 6x 190cc direct port jets and 1x 500cc pre throttle jet.  Direct port comes with all the advantages you would expect, except that pre throttle does cool down IAT'S more. That's why my direct port nozzle placement is closest to the plenum as possible in the runners to allow the air more time to cool before being sucked in. I'm also putting that one 500cc pre throttle jet to help with more cooling. It's a hybrid system. There's a lot more advantages to moving over to a PWM solenoid with a constant pressure system vs my old PWM pump setup, but I'll get more into that once I'm done converting everything over. The ricer in me is excited to see SS tubing all over my manifold though!
×
×
  • Create New...