Jump to content
SAU Community

Recommended Posts

FMIC are an odd one. Most people cut the front bar to fit the pipes. This makes them a nono. If yours is properly fitted with no hacking etc it should be fine.

That's right Sin, if you have changed/modified your chassis to fit a fmic it is defectable but if it fits correctly it is allowed hence the time role have passed through Dickson with fmic. However it the car had a top mount intercooler like WRX's you cannot have a fmic without engineering because your average skyline, Silvia etc has a forward facing intercooler outside the chassis frame oem. Same goes for turbo lasers where they are next to the engine.

I agree and disagree. Cutting the reo bar i agree with being a big no no but when i did it on my old r33 i took the car to a panel beater and ask if there was any issues with cutting a hole in the part near the wheel well and above the chassis to put the pipe through and got confirmation that part of the vehicle if cut will not change the integrity of the strength of the vehicle.

Any one else done the same?

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Dont rely on mechanics to get it right, read your adr's.

The adr's on your compliance plate are the ones you have to comply with.

Hole for pipe needs i think...

3mm reo plate, welded on 100-150 mm all sides from hole.

Something like that, cant remember details.

Not all rules make sense for specific purposes, some are there for general principals.

The hole in that spot on that car may not make the car any weaker, BUT, they want it done anyway cos they cant be that specific in the rules.

Dont rely on mechanics to get it right, read your adr's.

The adr's on your compliance plate are the ones you have to comply with.

Hole for pipe needs i think...

3mm reo plate, welded on 100-150 mm all sides from hole.

Something like that, cant remember details.

Not all rules make sense for specific purposes, some are there for general principals.

The hole in that spot on that car may not make the car any weaker, BUT, they want it done anyway cos they cant be that specific in the rules.

I've heard that since I did it. The car hasnt changed and still passes roadworthys.

I think they need to set the rules so that everything is the same.

Somethings are illegal on one vehicle and on another vehicle its legal.

Something to help people with the silly defects given to some modified cars on the side of the road. Namely Noise Tests on the side of the road.... Print this off and ensure that the officer at the time of the test follows the guidelines set out by the National Transport Commission of Australia. Note that this document specifically mentions the allowed equipment for noise tests angles and distances rpm for types of cars etc

http://www.ntc.gov.au/filemedia/Reports/NatStatExhaustNoiseTestSept2006.pdf

I will be adding up more soon but just advising that they are doing the same blitz through Westfield Woden at the moment and have confirmed with Westfield management that they are no allowed to be there unless invited by Westfield

I will be adding up more soon but just advising that they are doing the same blitz through Westfield Woden at the moment and have confirmed with Westfield management that they are no allowed to be there unless invited by Westfield

Did management confirm they HAD invited them? Your post is a little vague there :P

How about a $40 car cover?

They cant see sht then, they cant see rego or number plate.

Just cover your defects and rego when parking.

And some kind of alarm so they cant f&@k with it.

Or tiny locks so it cant be moved without breaking something, and if they do that....... well, you can imagine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...