Jump to content
SAU Community

Recommended Posts

Hi all,

Mi purchased a pull type gearbox with an OS Giken push/pull converter in it. I am now wanting to remove the converter and run a pull type clutch again. The only problem is that it looks like the standard clutch fork was removed to install the converter. My question is what will I need to return my gearbox to standard to run a pull type clutch. I will need a clutch fork and carrier bearing or whatever it is called correct?

I also have a complete rb20det gearbox here that I can take parts from if I am able to use the clutch fork and carrier.

Thank you for any info you can give me.

PS, anyone want a OS Giken push /pull converter :P

Link to comment
https://www.sau.com.au/forums/topic/425065-pushpull-converter/
Share on other sites

Okay so i have managed to figure out what i need. I need the standard clutch fork and the pivot assemble that bolts into the centre plate of the gearbox. The push/pull converter replaces all of this. So i am after all this stuff ASAP as i would like to have my car running. Anyone with any info on where i could source these parts please let me know!

What are the best jap wreckers in sydney/melbourne?

  • 4 weeks later...

Okay, managed to source some genuine parts from Amayama.com

The two parts you will need to convert gearbox back to pull type is Nissan Pt # 3053112U10 - Lever Withdrawl (clutch fork) and #30536AA50A Fork Support Assembly Withdrawl (the pivot point)

It cost me about $150 and a 2 week wait from japan. Image from FAST below with part numbers.

aykRYGX.png

Search Tags: R34 pull type clutch OS Giken push pull converter

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...