Jump to content
SAU Community

Can Putting R32 Gtr In Rwd = Oil Pump Failure ?

geetea-are
 Share

Recommended Posts

geetea-are Community Regular

geetea-are

Posted
Posted (edited)

I just got off the phone to the original owner of my r32 gtr who carried out the modifications and rebuild, he told me not to put in rwd drive because that's how he blew the n1 pump and required him to replace the bottom end bearings, he said he was doing a burn out when the oil pressure dropped, i'm confused with what could have caused this failure, the car has restrictors fitted to the block and a crank extension but doesn't have any oil control besides that? Since then the car has done over 5000kms and hasn't missed a beat, all I can think is that it has a mines ecu which are totally shit, could have the crank been incorrectly balanced?

Edited by geetea-are
Run-It-Hard Veteran

Run-It-Hard

Posted
Posted (edited)

Maybe didn't run enough oil either. I had oil pressure drop in my car on full boost with about 5 litres, added a extra litre and I have no more issues.

Just thought about it, doubt it would be the same problem. Probably just got happy on limiter for too long lol.

Edited by Run-It-Hard
geetea-are Community Regular

geetea-are

Posted
  • Author
Posted

thank you this is making me feel a lot better I have bought over 7 grands worth of parts that will be put on before October, then I rang the old owner to ask what head gasket he put on in the rebuild and he gave me this info............ i thought I couldn't get it tuned

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...