Jump to content
SAU Community

V35 Skyline Navtool - Interface Adapter For Screen

r33skylinegtst
 Share

Recommended Posts

r33skylinegtst Mentor

r33skylinegtst

Posted
Posted

For sale is a V35 Skyline 'Navtool' - this is an interface box that allow you to connect external video sources to the factory dash screen.

Through a shipping error I ended up with two of these, I've installed one in my parents vehicle - as pictured - and the second one is for sale.

It connects behind the back of the factory GPS DVD drive (above the glove box), and gives two video inputs, whilst still retaining the factory info screens if you use them, and will switch to the factory reverse camera (where installed) when the car is put in reverse. These are a plug and play system, so no hacking of wiring looms etc.

It should be noted that the factory screen is NTSC, so to connect say a DVD head deck you'll need the ability to switch video inputs from PAL to NTSC (most JVC's will do this for example). This may also fit the M35 Stagea as they appear to use the same screen, but I can't confirm that for sure.

$200 firm including shipping Australia wide - these normally retail for around $300 by the time you pay postage from the states. PM me if interested.

post-7190-0-81613900-1368622479_thumb.jpg

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan 路 Posted

      Well, fun day was had, I finally found a house that will do me just fine, 1980's brick build, but with full fresh renovations, plus new colour bond fencing all round so puppies are incoming 馃悤, and water tanks for the garden, and it's located in West Goulburn..... @Duncan 馃, so day trips to Wakie to watch cars going Zoom will be on the cards In the end it cost well under my budget and was actually better than alot of the more expensive joints I was looking at, it is in a good area, close enough to the shops, public transport, and the Wollondilly River Weir,  and the great walking paths along the river, but far enough away from town to see minimal traffic The deposit is dropped, the conveyancer is conveyancing and I should get the keys in a week or 2 as the property is currently unoccupied  As with everything I own, I'm doing up a modifications list, as it doesn't have solar, that is first up on the big list, all of the panels and enough batteries to keep the joint warm, or cool, followed by a largish carport out the front, the small list, which will start as soon as I have keys, is some security stuff, like cameras, screens, and the usual "crazy prepper" additions that weird old people like (mouse holes to stick shot guns out of, and the usual man traps that the average person installs for the unsuspecting and unwanted guests 馃ぃ) The gardens front and back are OK, but, not to my standards or liking, so landscaping will be a fun job to start getting into, so when spring is sprung I'll do a heap of planting, lots of natives and vegetables is the plan, the old owners were more "Old English Garden" type, so basically Roses and other weird looking things that are destined for the green waste bin One thing that is staying garden wise is a nice established hedge out the front, it is about 5 foot tall and covers the whole front of the property from prying eyes As for the car hoist, the roof in the garage has some height to it, but, I'll need to get an installer out to see what can be done, width wise may be a issue, but my building inspector will be getting back to me over the next week with his recommendations  Small, but cosy     
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT 路 Posted

      I tried to get in contact before I went to QLD you didn鈥檛 respond, then I tried to contact you in r31 club.  I thought you fell off the earth or something haha.  I will grab it off you but unknown when I will be up that way 
    • GTSBoy
      Crank Motorsports Front Axles

      By GTSBoy 路 Posted

      I think that might be in the question. He is going very low, and I think the standard GTR ones are simple tripod joints (like the rear NA/S chassis ones), not proper CVs (like R chassis turbo/GTR ones). Proper CVs take the misalignment better than tripods.
    • dbm7
      Got this r31 silhouette flood car to rebuild.

      By dbm7 路 Posted

      Do you still need the wiper motor and stuff?
    • Duncan
      Crank Motorsports Front Axles

      By Duncan 路 Posted

      I haven't used the Crank Motorsport ones, but can I ask why not use standard gtr/gts4 axles at the front? They would easily cope with that power level. BTW.....sounds like quite the project!
脳
脳
  • Create New...