Jump to content
SAU Community

Recommended Posts

here is my draw dropping taxi, this has been my project since nov '12 and it makes girls wet

i bought this with the following mods:

RB25DET S2 Mod plated
RB25 Box
One piece tail shaft
ISC coilovers camber tops
Front Strut brace
Fmic

boost controller
3' exhaust from dump back
Stock turbo setup
17x7 wheels

and this is what it looks like!

LaurelCC_zpsc72f74ad.jpg

so, story went i couldn't actually keep the car at my place cause my landlord was complaining about how many draws it would drop so it stayed in this lovely garage untill i moved

734985_514186861934738_501380251_n_zps7a

I couldn't actually drive it until april as i was a p plater untill then, so it was garage life for a while.

Anyway so i started buying things for it, and i bought a 5 stud conversion with S14 fronts with slotted rotors and S14 LCA's for 20mm extra lock and R32 rear for the individual handbrake you know?

IMG_0367_zps6b5123ca.jpg

then acquired VSKFs! Hopefully they fit all flush with camber and minor guard work but we'll see 17x9.5 + 26 and 17x9.5 + 28

735089_519846921368732_1365306353_n_zps1

ordered somethings off streeter and my S club lip came first

LaurelSclublip_zpsefd03c95.jpg

dmax wings came, but unfortunately were smashed, so he resent them and they came but they were C35 wings and in the process of waiting for them again :(

illegal drove it, took a photo

laurel_zps49413cc9.jpg

was hunting around for a turbo, and found a brand new Garret 3076r .82 rear housing for a insane price

laurelturbo_zps23ce00cf.jpg

brand new 6boost manifold was in order, so ordered it

6boostmanifold_zpsb252dc1d.jpg

debated whether to go front facing plenum or just stay crossover, but robbed a bank and bought a whole brand new setup

front facing plenum, 90mm tb, HKS rail and 850cc sard injectors

IMG_0486_zps52c86563.jpg

this is my garage

431074_578555092164581_17266497_n_zps5bc

Haven't done anything, as i don't have a daily driver and have to drive a few days a week.

have plans in the next couple of weeks so will post when and if it happens

have some other goodies lieing around also

Edited by skyline32sup
Link to comment
https://www.sau.com.au/forums/topic/426030-c33-taxi-project/
Share on other sites

oh tue, yeah going just a gloss black, cheaper to paint panels.

engine bay will be purple/black theme, just trying to find black radiator haha.

yeah i hear, everyone is running 3076 these days, good turbo though, was either that or td06 25g

Great minds must think alike. I had my bay painted midnight purple but was a shit job done by the guy so im gonna have to do it again but thinking silver this time. Which is kinda sad as it looked good but its just started cracking. Needed better prep.

and yeah 3076 seems to go hand it hand with rb25.

  • 2 weeks later...

Haha yeah sure do.

5 stud is happening tomorrow, think iain is coming around if you wanted to feel free to, finally got some 5x114.3 wheels i can use to test fit the VSKFs and get tires accordinly, as 2 are on belts lol.

No real updates, I've got coin to get ECU and clutch but due to work hours being cut in half living expense have to come before car fml :(

Yeah iian asked me yesterday when ee had a forza sesh to come uup but im planning on doing a few things to my rig today.

also I saw you posting about tyres on chriss jdm sale page, you wont fit 235/245s under the guards with 9.5 +28s

I had 235s on 9 +22s and it sat on the lip as the guard wasnt rolled. Also apparently when you run over 9" wide you start getting issues with rubbing on the wheel wells if your planning on lowering it

Food for thought.

Lol didnt get much done. Missus car made a f**king weird grinding noise so spent 2 hours checking all her brakes and suspension and couldn't find anything.

And then Couldn't even get the hicas bushes out of my rear knuckles got the main part out but the sleeve is a massive karnt. Then layed my new body loom out next to my old one and checked everything was the same and nothing was missing

Oh yeah haha, my misses thinks something's wrong as soon as she hears a noise last problem was she left the handbrake on...... Lol

Oh sweet that's pretty cool

We not doing my 5 stud till next weekend do I can use a mates workshop and air /power tools cause lazy lol

Lol nice, air tools do help, get a cheap comoressor from suoercheap and a set of sca airtools. Might set you back around 300 bucks all up but makes working on 20 year old suspension all that much easier :P

Oh and taking wheel nuts off.... saves like 5 mins in hand unwinding lol

  • 2 weeks later...

Last weekend got together with the boys and we did the S14 5 stud conversion on the front, the fronts was pretty easy according to Iain who did most of it. However when we tested my 17x9.5 +26 VSKFs we didn't think they would fit and well........... they didn't SO, i hunted on all afternoon for 15mm hub centric spacers so we could get them on and i could be mobile because i had to drive home. Had absolutly no luck, so had to buy a set of S14 stockos with tyres @ 11pm just to get me home. I drove home on massive toe out lets say i'll never be doing that again.

1013765_4845090652044_1832915570_n_zps92

1044653_4845091172057_1447407172_n_zps00

1005601_4845089932026_216467738_n_zps5bb

1012372_4845091932076_1085530877_n_zps72

998882_590776697609087_1785427206_n_zps0

I got into Erin @ JDM Garage and swapped my 17x9.5 for his 17x9s and we fitted up to S14 fronts and would need 7mm to clear caliper. So I've ordered extended wheel studs to accommodate the slip on spacers. Got them wrapped in some new 215/40s all ready to go.

1003900_592335070786583_524697831_n_zpsd

This weekend i said to Iain I'd come up to sunny coast and we would do the R32 5 stud rears because apparently that was meant to be the easiest, anyway we got into it about 3pm? We took the wheel off and went to remove driveshaft hub nut, we pulled it, pushed it, blew it and unfortunately our gym sessions didn't pay off and the f**ker wouldn't come off. I had my mate Ben coming around to fix my Iphone and he suggested we get some tools from his work to help. We came back with a breaker bar and had a crack, Ben aka mr muscles got on there and cracked it and we jumped in joy. Got cracking on it and we discovered that every nut that needed to be undone was hard and Ben became the god of cracking nuts. We uncounted the 27mm handbrake and rotor shroud assembly, we removed the exhaust of its mounts to get the breaker bar on the socket with extensions and he heaved and pulled and kept going cause his buldging muscles were shredding his shirt then, his eyes were about to pop out and then.... CRACK it become loose, however it had to be cracked again and it came off. When we took it off we realized that the thread had lock tight and a o ring on it which basically was saying " you're never getting this off " We broke out in a dance.

So we went to pull the Hub off and it didn't come off. We double checked we had removed the 4 bolts and sure enough it wasn't coming off. It came off after about 1 hour of bashing and it was coated in rust, It was rusted on.

anyway

Iain started putting the 5 stud hub on, did it all up, swapped over handbrake sleeves, connected up hand brake cable and then went to connect the brake cable and it didn't go in. He pulled the brakes off and there was a brass resistor in the inlet and was stopping the hose screwing up, we all figured we would try remove it as was threaded in there, Ben aka mr muscles got it out and it screwed up and the assembly was all back together then we fitted the VSKF and it fitted!

931230_4845086611943_1651866108_n_zps226

9037_4845087851974_493352799_n_zps405d92

1001613_4845088131981_2119906044_n_zps8c

1044925_4845088491990_1537466188_n_zps30

1005078_593384927348264_998014037_n_zpsf

we had a lovely visit by the police of a " noise " complaint and asked if we had been reving our engines, they were basically on crack and left and not to mention when they saw Ben aka mr muscles they realized that not enough there gun would save them, so they went on there way happily.

The other side was alot easier, as there wasn't lock tight on any threads and the hub wasn't rusted in, driveshaft hub nut was easier and it took half the time.

we bled the brakes and then iain noticed the brakes weren't working correctly, we were worried that the removal of the resistor/modifiying had caused this, however we went to the local BP and got some brake fluid and re-bled the brakes then took it for a test drive and was all sweet.

We finished up @ 2:45am, none of us had done a 5 stud conversion, i was basically an apprentice to master Iain and mr muscles aka Ben. I drove home with the angry mrs and got home @ 4am and i don't expect sex for atleast 2 weeks LOL.

probably forgot something anyway, awaiting my extended wheel studs GKTECH and hopefully should have the VSKFs on the front this weekend,

Edited by skyline32sup

another good looking build wish i had your money to buy all these fancy things mine would of been done lot sooner first question WHERE THE HELL DID YOU FIND A CLUB S LIP????? been looking everywhere haha

Nah was drug cops from Wynnum, pulled me over checked license on my way thank god lol

Got some 30mm bolt ons last night to check clearance, looks like i have a bit from coilover > wheel maxed out camber and it sticks out a bit, so will be testing 20mm bolt ons and go from there.

I got my S club lip from JP, I bought a whole front bar for 200 AUD with the lip, and only shipped the lip haha.

There was one for sale like a month ago on Boostcruising for 200, is that the one you got Dan?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...