Jump to content
SAU Community

Velo Milano Z32 Afm Cf Bonnet + More. Nissan S15 And Other.

gmr
 Share

Recommended Posts

gmr Collaborator

gmr

Posted
Posted

Located in Melbourne, Eastern Suburbs. PM or 0422 889 896 cheers Alex

CF BONNET, REINFORCED W/ STOCK LATCH

CF Bonnet with ADR bracing/reinforcement and stock latch. Weighs A LOT less than stock - I can lift, move, install on the car myself, stock one is a two people job.

Has the stock latch on it so no bonnet pins required!

Condition is good, few scratches in the clear coat but structurally no issues. Drop some weight at the front and aid engine cooling! Plus... RICE :D

$400cheap! price takes into account scratches in the clear.

bgDd7.jpg

NISTUNE, S14 ECU/b]

ECU is a S14 ecu and is compatible with either ADM or JDM S15. S14s did not have NATS so if you have an ADM S15 it will remove your NATS.

Tuned for Z32, FMIC, 440cc injectors and full exhaust. Made 186 kw on 14psi at Chasers.

$500 ono.

Z32 AFM + PLUG

Straight off my car, no issues, recently cleaned.

$140. on hold

NISSAN 440cc INJECTORS

$200 ono.

(IF ANYONE WANTS ECU+Z32+INJECTORS WILL DO VERY GOOD DEAL ;) )

VELO MILANO XL (seat only)

Drivers seat for sale (passenger sold) has tear from getting in and out but does not effect function.

Milano XL retails for $700. Not sure what the Monza harnesses are worth but Velo's equivalent starts at $150.

$200 firm.

WQDtCXD.jpg

ccUooiJ.jpg

NiEf1rZ.jpg

Drivers

tfN4TZW.jpg

Tear.

1jUXqCK.jpg

Just the seat, the rail and mounts are in poor condition and I won't sell it in fear of one us having the seat separate from the rail :/. If you have stock rails the mounts can be made easily as the seat is bottom mounted, two pieces of flat and two nuts welded on the flat done ;).

Dimensions http://www.velo.com.au/site_files/421/velo...ght chart.pdf

NISSAN S15 BOOT

No wing, debaded and dekeyholed (? lol). Perfect condition. Red $400 $300 firm.

Full S15 Exhaust $130

SMIC shroud $10

S15 Stock Fuel Pump $40

T28 Split Dumps Top both $20

Cats gutted $15

S15 Stock Front Swaybar $40

S15 ECU Bracket NOW $FREE ZOMG FREE SHIT ZOMG OMG OMG TAKE IT!!!

gmr Collaborator

gmr

Posted
  • Author
Posted

hey mate, the seat is no problems. It's actually just the colour of the fibreglass that looks a little dirty, you're more than welcome to test it.

The wing, I am not sure.. it was thrown in when I bought the car, but R4Race on NS has one that looks identical and I think he said it was a Fujitsubo.

e8bT7.jpg

c6qLm.jpg

one showing the bonnet vents

lhmU3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...