Jump to content
SAU Community

Recommended Posts

If anyone is interested Possibly best to contact me via pm or ph on 0431113255.

They are from a ferrari f430 GT3 race car, i can have brackets & hats made to suit any car, it will come with Center-lock hats, you can have choice of the deep ones or shallow ones both are pictured.


Details as follows:


Front Kit.


x2 6-piston Brembo Monobloc caliper with removable bridge.


Weighs in at 3kgs.


Pistons are titanium.


x2 Racing disc 380mm x 32mm.


Bobbins and hats included.


Rear kit.


x2 4-piston billet calipers


x2 Racing disc 355mm x 32mm


Bobbins and hats included.


It is possible to run a street pad or some pagid types and drive the car to the track.


Price $11,000 you can price the kit up here, shoot me some offers.



Photos:

IMG_0011_zpsb8d0b60e.jpg

IMG_0012_zpseb9107d6.jpg

IMG_0005_zpsc7b9dd75.jpg

9a5d809e9155f0a4415be4ef082a4fd9c7bae799

d42f897b3c6f861eb60a032e9e0bec252fa82383

f0249682645470a834b8075fe0b3a088c9c26f39

Edited by 24jzgte

This bloke, always with the top notch gear.

Really knows his stuff.

Great guy to deal with too might I add.

GLWS mate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...