Help! Turbo, Boost Controller And Boost Gauge Issues

[marni]

Hi all

Please help

I've got an R33 series 2 with a high flowed turbo (RB25DET).

My boost controller has 4 settings and turbo can boost up to 25psi. (Not that I drive it that hard)

Either way ATM I'm not sure if its the turbo that has problems or what, seems like it's spooling and boosting properly however it's lagging hard in first and second gear doesn't want to let it boost past 5 psi but third gear it wants to take off like it used to in the first 2 gears no matter which of the 4 settings I have it set on.

When it should be registering a psi amount on controller as it used to its staying at 0.0 and isn't registering on the boost gauge but in third gear it will.

I think the alarm was hooked up with the boost controller. Since then though the alarms been disconnected and the controller has worked properly up until now.

Just want to make sure I'm not damaging anything, the BOV is releasing pressure though inhibited in first and second because its not boosting like it should be

I'd appreciate any advice heaps

It's hard being a chick with a worked car