Jump to content
SAU Community

Recommended Posts

hey guys for awhile now ive been searching for a good 100% waterproof car cover as the car ive got is in amazing condition and i don't have a garage/shed to keep it in the car cover i have atm is good but the water is soaking through in heavy rain thought you guys may know of some good ones as super cheap and other car places only seem to have cheap one!....

oh really that looks like a good one thanks guys as i live in tassie the weather here can go from hot to freezing storm in a hour so need something good quality are they 100% water proof?

  • 2 weeks later...
  • 1 month later...

yes i had that same one ripped as soon as i put it on the car really thin junk

if you want a good one get a http://www.autotecni...proof-car-cover i got mine from autobarn had a 12 month warranty and has done amazing in the tassie weather frost rain every time i take it off its bone dry!

yes i had that same one ripped as soon as i put it on the car really thin junk

if you want a good one get a http://www.autotecni...proof-car-cover i got mine from autobarn had a 12 month warranty and has done amazing in the tassie weather frost rain every time i take it off its bone dry!

+1 buy it, you wont regret it

  • 1 month later...

http://www.autotecnica.com.au/stormguard-full-waterproof-car-cover

I have been using this one for 5 years. Very happy with it. Has vents to circulate air so it doesn't get damp with high humidity.

I'm using the same one and the only problem which I've discovered, or at least for my R34, is that it starts to tear open at the point of where it covers the spoiler. I assume it's due to the edginess.

Can provide pics if needed.

  • 5 years later...

For future reference. Car is an R33 GTR. I got the Autotechnica Stormguard Cover.

Ordered the 1/184 sedan large up to 4.74m. I would go a size bigger as it is tight over the rear wing.

Really happy with the design, quality, fits right which is great - definitely recommend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...