Jump to content
SAU Community

Recommended Posts

Parts are located in Springwood (20 mins west of Penrith) Prices are negotiable so make a reasonable offer. Prefer pickup but can post/courier at buyers expense. Lots more parts to be put up so keep an eye on this thread for updates. Here's what I have so far. All parts are from my R32/34 which was up for sale in an old topic. Have most receipts for items. Heaps of stock and aftermarket parts in near new or excellent condition. Be quick. Need this stuff gone ASAP!

CONTACT Luke BY PM OR ON 0429 098 883

post-23286-0-80330800-1359437359_thumb.j

Lenso GT05's 19x9 (front) 19x9.5 (rear) with about 90% tread (235 fronts and rears) Mint Condition $1300

post-23286-0-54087500-1359437377_thumb.j
Custom RB25 manifold with turbosmart ext pro gate (can seperate) $600

post-23286-0-29863300-1359437390_thumb.j
FMIC with custom alloy piping to suit RB25, hoses, clamps included $400

post-23286-0-24605000-1359437401_thumb.j
Near new BMC enclosed pod filter unit $150

post-23286-0-15463700-1359437421_thumb.j
Near new 50mm core radiator $150

post-23286-0-83915900-1359437461_thumb.j
Greddy catch can with hoses $110

post-23286-0-63564800-1359437468_thumb.j
Turbosmart sleeper series supersonic BOV with plumpback attatchment $200

post-23286-0-78419300-1359437595_thumb.j
6 x Siemens 630cc injectors with fuel rail to suit RB25 $650 (can seperate)

post-23286-0-64366600-1359437503_thumb.j
R34 Neo intake manifold $120

post-23286-0-28066200-1359437513_thumb.j
R34 Neo stock plenum $70

post-23286-0-86703800-1359437561_thumb.j
R32 Air con compressor with hoses etc $110

post-23286-0-60047900-1359437568_thumb.j
R34 Neo alternator $70

post-23286-0-45031700-1359437575_thumb.j
R32 gtst power steering setup $70

post-23286-0-98522400-1359437579_thumb.j
Mint R32 GTR front bar with N1 slots, Custom blue $450

post-23286-0-79725200-1359437601_thumb.j
Down pipe for 3" exhaust $70

post-23286-0-50721000-1359437607_thumb.j
R32 GTR front reo bar $149

post-23286-0-68654100-1359437714_thumb.j
High quality car alarm with paging system still in box $100

post-23286-0-05366400-1359437719_thumb.j
Boss kit to suit R32 $40

post-23286-0-58374300-1359437739_thumb.j
R32 GTR fuel pump $70

post-23286-0-46722300-1359437744_thumb.j
Chrome guage cups with all brackets $15 each

post-23286-0-51429800-1359437749_thumb.j
Stock R34 Neo injectors $119

post-23286-0-97470400-1359437753_thumb.j
4 x Stock R32 gtst rims 16" need new tires $180

post-23286-0-21264200-1359437760_thumb.j
Genuine R32 GTR front bar mesh $50

post-23286-0-18462600-1359437765_thumb.j
R34 Neo throttle body $70

post-23286-0-73641000-1359437769_thumb.j
R32 GTST Custom 3" turboback exhaust system, resonator, hiflow cat, big chrome cannon, ext wastegate piping, under 90dbs $600

What is the manifold made of mate? Steampipe or stainless? Does it form into a merge collector and is it t3? More pics?

Pretty sure its made of steampipe. Definitely not stainless. Not sure about merge collector. Will have a better look and get back to you. Unsure of brand but almost 100% sure its a custom made setup for a highmount t3. I had a gt35r bolted onto it with a .63 rear and the compressor housing sat just in front of the strut tower in an r32 gtst. It was very responsive and hit full boost quite early. If you PM me your mobile number I can forward you on some more pics if you your keen.

Got someone else quite keen on the manifold also so first in first served.

Pretty sure its made of steampipe. Definitely not stainless. Not sure about merge collector. Will have a better look and get back to you. Unsure of brand but almost 100% sure its a custom made setup for a highmount t3. I had a gt35r bolted onto it with a .63 rear and the compressor housing sat just in front of the strut tower in an r32 gtst. It was very responsive and hit full boost quite early. If you PM me your mobile number I can forward you on some more pics if you your keen.

REO BAR SOLD!!!

Pm's replied.

Going to have an R32 GTST shell available soon and also a built forged engine with bottom end damage up for sale. Keep an eye on this topic for a link!

PM a price for the motor and loom if you have it too. Interested in gearbox also

Still working out price for the motor. Has bottom end damage but has still got good internals and head. Gearbox is out of a 33 I believe and is in prefect condition with a near new exedy racing clutch. Not 100% on type. Call me for details 0429098883

Radiator still available? And would it fit a R34 GTT? Cheers

Yeah still got it mate. It was fitted for a 34 gtt engine but was installed on a 32 so not sure. I can get you measurements if you like. Perfect condition radiator. Near new!

Edited by FSTR32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...