Jump to content
SAU Community

Recommended Posts

This is off my little brothers car.

Purchased new about 12 months ago but was removed a couple of months ago

due to an upgrade.

Turbo has done 12,000 klm

Low boost 12 Psi = 210 rw kw

High boost 18 Psi = 242 rw kw

Very responsive turbo with the power it makes.

Excellent street turbo with good drivability, much stronger mid range power then a stock turbo.

This has always been cooled down for 5 mins as he has a turbo timer and alarm intergrated into one.

He is overseas at the moment and asked me to pay his CC bill in exchange for the turbo. I dont have an GTST and both mates with small block RB's are going to be using bigger turbo's so its no use to me!

This is a complete set up

Turbo $1700

Twin Dump pipe $250 (can’t find the splitter attachment) (ON HOLD)

HKS upgraded adjustable actuator $300 (ON HOLD)

The turbo will be sold with the braided line kit, gravity drain, water line kit and 90 degree snout. All banjo's are supplied.

Also supplied is the HKS literature that comes with the items

I have a spare 90 deg snout that I was going mod but no need any more so if anyone needs it $70

Check out the pic’s for condition!

Located in Sydney but can ship interstate at reasonal prices and excellent service.

Yes, parts will be sold seperatly and I have put the costs next to each item.

The turbo dump will fit in place of the factory dump pipe which will then bolt onto whatever front pipe you had on it, as long as it fit the original DP this will fit everything as it was.

Preference will be given to the person who buys the turbo for teh wg and dp.

if you or anyone is interested in the other parts other then the turbo, please PM me, first come first dress. When the turbo is sold and they make a decision of the accessories you wil be notified ;-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...