C34 Manual Conversion

[chef_stagea]

hello,

excuse the new thread,

i have a full manual conversion for a c34 stagea

i have

-r32 GTR gearbox with the following

-shifter

-speed sender

-all solinoids for reverse lights etc

-breather hoses

-tail shaft bolts

-slave cyl (with braided line)

-the gearboot over the shifter attached to the box

-clutch fork, very good condition boot and bearing over the imput shaft (cant remember its name atm)

this box will take a push type clutch

-centre console from a series 2 rs4s (much better than an s1 260)

-clutch pedal (with box)

-brake pedal (with box)

-clutch master cylinder

-clutch line

-shifter boots (flat one, tall one and bracket to hold down)

-manual foot rest (cant run the auto one as it is too bit and hits the clutch pedal)

-handbrake with cable what links to the end of the auto one

i have everything here to complete the conversion apart from the following

-a few spade connectors for the wiring of the reverse light

-bell houseing bolts the auto ones are no good im fairly sure

-push type clutch (one of those things... put a new one in to save pulling the box of again!!!)

-fly wheel to suit RB

box is in very good condition - no crunching, grining etc etc

and all other parts are as shown in photos, no serious marks... pm me with your email adress so i can send full resolution photos

(sau only takes 2gb size)

i can sell the box seperatly if req

$1550

Located in Melbourne east

can ship interstate if req (box will go on a pallet) i have used northline freight in the past for gearboxes, and seem to be quite cheap.

0400099986

[chef_stagea]

Whos doing their tax return soon?

[4bidn1]

Yeah a pallet is only $200

[chef_stagea]

Sold pending

[chef_stagea]

Gone