Jump to content
SAU Community

Something Easy To Make On A 3 Axis Cnc Mill Have Some Free Time But Carnt Think Of Anything


Recommended Posts

  • 2 weeks later...

Depending how simple you want to go you could do something as easy as a slip on spacer that locates to the hub.
Slightly more technical than that would be a bolt on spacer.

Realistically they should have tolerances but shouldn't be too much of an issue if it's just teaching you to use the machine. Still requires some measuring and tool paths.

I've been making Man Sized LEGO out of MDF on my CNC at work. LOL

Oh and a double side Prop/Fan Blade... Would love to play with metal. \m/

How about something simple but expensive from nissan.

Like the heater core pipes. those plastic ones that bolt onto the core and cost $120 each.

One has a simple valve for heater control. You could get a ball valve or something for that bit.

Make something useful, and make some $$$

  • 4 months later...

I've been making Man Sized LEGO out of MDF on my CNC at work. LOL

Oh and a double side Prop/Fan Blade... Would love to play with metal. \m/

haha that's awesome!! got any pics?

  • 3 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...