Jump to content
SAU Community

Recommended Posts

But i changed my G/B oil twice to fix it cos the amount of metal i found in the box was crazy. first time acted as a flush....

thats what i did as well, got the oil changed, then a few months later changed it again and put in the nulon g70. the 2nd time i did it the oil actually was still quite dirty, maybe from stuff in the gears. but now its fine.

o/k it looks like you might be up for one grand. But another way to do this might be to get another gearbox from an import wrecker, he might even give you a discount if you give him your old gearbox.

Most import gearboxes were working perfectly right up the instant of the BIG ACCIDENT, so should be fine in your car. The wrecker will probably sell your stuffed gearbox to a gearbox reconditioning place. They will strip it, for parts, and charge the next customer for new parts (yeah I know !)

It might save you heaps. The worst thing that can happen is your new gearbox also has a problem. In my experience import wreckers will take it back and give you another one. But be sure to get this in writing.

Well... as of last night I think the problem is worse than first thought... with the clutch anyway. The gearbox seems to be behaving itself now.

The clutch on the other hand isn't. Last night while just accellerating in 4th on the highway to get to the speed limit the car went a bit funny like revving and not going anywhere...

Then got onto the main road and accellorated again not thinking of what happened before.. but it happened again.

Do this mean my clutch is absolutely and utterly rooted??

And if so, should this problem be fixed sooner than we thought?

What happens when they start to slip under load is that there is terrific heat generated from friction. The tiny bit of clutch material that is left wears extremely rapidly, leaving you stranded on the side of the road.

It probably has a few short trips left in it though, just do not let it slip. Drive like a little 200 year old granny. If anyone blows their horn at you, just give them the finger !

Arrange something with your local happy smiling mechanic first thing tomorrow.

yups, same thing happened to me wen i had my celica. clutch was slipping and i didn't realise, still kept trying to rev it wondering why it didnt move hehe. would b reving it past 3000 rpm and the car would accelerate so slow :D

but then i just took it real easy on the clutch and kept going with it for a few weeks until i had cash to change it.

perhaps u should do the gearbox and clutch at same time to save some labour costs.

Guest Boxhead

erin dave here,

same thing happened in our old WRX. Was slipping a bit, and organised to get it replaced the next week. At the end of the week was driving it down the driveway when the car just decided not to move at all. Had to get it taken up on a truck. I would get something done asap or you will find your self stranded somewhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...