Jump to content
SAU Community

Recommended Posts

My A31 (1993 SE-4) has always done this thing where once the car starts moving it fires the central locking and locks all the doors, except the drivers. It's always annoyed me a little bit but not enough to do anything about it.

Unfortunately this system seems to have developed a fault, if you attempt to unlock one of the doors it instantly locks it again. It appears that the door lock actuator is being fired continually which I imagine is going to wear them out sooner or later.

I'd like the keep the central locking working, but disable this one specific feature, is there any way to do that?

Link to comment
https://www.sau.com.au/forums/topic/428384-disabling-the-automatic-door-lock/
Share on other sites

sounds similar to what the new Hyundai's do where all the doors lock after 15km/h it's part of the safety and i believe it can be disabled at the service department.. not sure if that's of any help but i'd take it to someone that knows their way around a locking system.

Chris Rogers for instance.

It's a factory feature, it's not a fault & it's not constantly firing, the master unit for the central locking detects when the locks actuate and will try to lock them again.

They won't 'wear down' over time because of this.

If anything, trying to manually unlock the door while moving will wear our parts, hitting the button on the driver's door probably doesn't do much good either.

I know of one dude that ended up with a bent door lock actuator rod from a passenger trying to constantly override it.

Central locking is controlled by the passenger side power window switch (it's built in)

Other than removing your speedo, or removing your central locking and/or passenger's power window switch, I don't know of any way to remove it.

You could get someone else to drive, , unplug the passenger window switch and use a multimeter to look for a signal that comes on around 10kmp/h (often 15 or 20kmp/h with older/stretched speedo cables), theoretically there's a wire off the dash that triggers something inside that switch to lock all the doors.

Don't know if it's a simple as cutting one or two wires and if that'll cause other issues, but if you're that desperate to get rid of it, it's worth a shot.

Had a look but apparently my search abilities suck, not helped by the fact that all the results for "lock" are about steering, probably also not helped by my lack of knowing Australian English.

The reason this came about is my GF managed to get her hair trapped in the door and didn't notice until I was joining the motorway, when she unlocked the door the dam thing fought back hard enough that it bent her fingers back.

The car will only lock the passenger doors, not the drivers side....so, the safest place for your girlfriends hair is probably in your lap....just saying....

Why was her hair near the lock anyway? that's a mile away from the headrest.....

Windy day and her hair is waist length so easy to trap it when closing the door, hell I manage to shut my own hair in the door sometimes and mine's only armpit length. I usually notice before reaching a sufficient speed for the doors to auto lock.

As for your other suggestion, while it has appeal it would be somewhat easier if I were a bloke :P

Windy day and her hair is waist length so easy to trap it when closing the door, hell I manage to shut my own hair in the door sometimes and mine's only armpit length. I usually notice before reaching a sufficient speed for the doors to auto lock.

As for your other suggestion, while it has appeal it would be somewhat easier if I were a bloke :P

sounds like a fun relationship :P

seems my memory is abit off although have redeemed my self by finding said post

http://www.skylinesaustralia.com/forums/topic/100905-auto-door-lock/?hl=%2Bmike#entry6656673

Edited by Dan_J
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...