Jump to content
SAU Community

Recommended Posts

Hi all..

Just need some input for new gear I am about to order from the states.

Doing the suspension this time.

On the order i have.

1. Berk Technology G35 High Flow cats.

2. Eibach 5.72050K Rear Camber Arm 03-06 Sedan, 03-07 Coupe G35 V35

3. Eibach 6365.140 G35 Pro-Kit Springs 03-07 Coupe V35

4. Hotchkis 22413 G35 Adjustable Sway Bars 03-06 Sedan, 03-07 Coupe RWD ONLY

I was going to go with BC racing coilovers, but as these are defectable in South Australia I better not risk it. Even though I would be defected by my fellow cop brethren, I don't want that hassle.

And i really only want a 1 inchish drop.

What are your thoughts? 1200 + 275 for postage for the lot. Pretty reasonable.

Feedback please :)

Thanks all

Link to comment
https://www.sau.com.au/forums/topic/428512-input-for-new-gear/
Share on other sites

You're a scholar mate. Thankyou.

I needed someone in Australia to give a good opinion.

I was looking at the Tanabe DF210s. 1.7 in the front and 1.3 in the rear and that would just be so low. With big 19s which sit outside the guards, having less than 2cms clearance from the top of the tire to the fender would just be dumb.

Also for the shipping price Conceptz is offering, it works out to be hundreds cheaper than finding the cheapest parts in different stores.

Yea got both of those from conceptz, good price for those two. Yea the Eibach is a nice drop. Not low. Holds car well. Install the sways first...then drive it a few weeks n then put the Eibach on...the hotchkis sways are amazing!! You will not be disappointed. Holds the car down so well, around corners and everything.

Have fun with them :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...