Jump to content
SAU Community

Recommended Posts

Spent last hour making a thread with pics.
Site wouldn't post it.
So f^$% doing it again.

ALL PARTS COME OFF A GTR THAT WAS RUNNING FINE BAR A BUSTED HEAD GASKET.

Nearly died, need money to pay off medical expenses (seriously.)

PM ME WITH WHAT YOU WANT, AND I WILL GIVE YOU A PIC.
ALL PARTS FOR SALE.
I WILL PROVIDE PICS WHEN YOU PM ME BECAUSE I AM NOT SPENDING THE NEXT HOUR PUTTING PICS ONLY TO HAVE THE PAGE MAKE ME LOGIN TO HOME AGAIN AND DELETE EVERYTHING.

Not posting anything as I work five days a week, so you'll have to come to north sydney to come get them. Sorry.
MMMMMKAY?

Keeping brakes, seats, key and ign' barrel.


BODY PARTS:

Hood (with liner) - $280
Front guards - $100
Front bar (minor scratch on front left corner) - $200
Boot lid + Wing + badges - $180 (Wing paint has the clear baked off, other wise in good nic.)
Grille - NO BROKEN TABS/CLIPS! - $100
Front lower guard bodykit pieces - $25 each.
Guard liners - $50 a corner.
Door shells (drivers side has a scratch down low, no dents though) - $150 each IF YOU WANT COMPLETE DOORS WITH GLASS TRIMS ETC, 300 each, bolt 'em straight on your car.
Wing mirrors - Pass side has baked clear - $50D, $35P
Door rubbers - $200 for the lot.
Door kick panels - $10 each with push clips.
Hood latch, support, front brace and cable - $150
Headlights - $100 each (including bulbs, no broken tabs)
Indicators, LH has broken top tab, $25 bux for it, $40 for RH indicator (with bulbs)

ENGINE/MECHANICAL:

C.A.S: $200
C.A.S Alloy bracket - $30
Cam gears aftermarket "Spool" - $40 each.
Cams - $80
Coil packs on rails - $220 for them plus the rails.
Coil pack loom - $50
GTR Injectors on rail - $150
Injector loom - $60
Radiator (flushed and clean) - $60
Aircon crap all of it, pump, etc - $100 for the lot (engine bay stuff, not inside stuff.)
Fuse and relay box - $100.
Airbox with filter - $100.
Washer bottle with motors (And fluid!) - $80
Coolant bottle - $40
Alternator - $80
P.S pump - $120
Brake booster - $150
P.S reservoir - $100
Cam covers - $50 each
Coilpack cover (No badge, wrinkle paint) - $80
Front cam cover - $60
Intercooler - $150

Intercooler piping - $120 for the lot, front cross pipe, main pipes all the way from turbo to intake.
Intake plastics (lower air box thingo, rubber pipes, and plastic piping) - $10 a piece.
The big thing on the pass side of engine bay with all the brake lines running to it, HICAS, etc. thingamijiggo - $200 sounds fair?
Turbo manifolds - $80.
Turbo manifold heatshields - $30 each
Stock turbo's - $100 each.
Turbo piping - top hard pipe, no badge $35, top rubber pipe $25, metal pipes off turbo's - $15 each.
Exhaust - $300 from the turbo's back.
Intake plenum (when I finally get the F@#$ing thing off) - $200
ITB's - $200 (unless I magically get an L28 Motor and a Zed then they are going too.. lol)
Head with valves (no cams) again when I finally get it off... - $450, valve seats in good nick, will provide the Tomei restrictor with it if you want.
Sump - $250.
GASKET KIT, complete factory one - $250.
Fuel pump & Tank - $260
Clutch cyl, booster and lines - $100
Block - $1200.
Pistons - $150 for the lot.
Rods - $150 for them too.
Crank - $240
Fly wheel - $250
All the oil lines and oil block, returns etc - $300
4x Airflow meters - $80 a pop.


DRIVELINE:
Gearbox - $450.
Clutch (good, good feel to it) - $200
Tail shaft - $180
Rear Diff - $350
Front diff - $280
Rear cradle with control arms, etc - $200
CV's, front and rear - $40 each.
Front hubs with bearings, no discs or calipers - $120 each.
Rear hubs same dealio - $100 each.
Front suspension arms - $200 for the whole shebang each side.
Factory suspension, good nic - $250 the lot.
HICAS steering rack - $120
Front steering rack with rack ends and tie rod ends - $180.
Sway bars - $80 each (F&R)


INTERIOR:
Rear seat - $180
Floor mats, F&R - $140 for the lot.
All interior plastic trims (bar center fascia as it's busted), so pillars, rear pillars, rear side seat trims, B pillar trims, kick panels etc - $500
Carpet - $200
Gauge cluster - $120 genuine 147 k's.
Center triple cluster - $50
AC controls - $50
Rear aus compliance window brake light - $100.
De-ioniser - $140
Rear parcel shelf - $150 (will throw in speakers, I think they work.. lol)
Roof lining - $140 (needs a clean, otherwise has no burns or tears I can see.)
Top center interior light fixture (complete unit) - $60.
Rearview mirror - $40 (good condition)
Sun visors - $25 each, pass has mirror.
Dash - good condition as far as I can tell, NO VENTS - $300.
Interior fuse box - $100.
Interior AC box - COMPLETE - $250. (looking for the heater valve control motor thingo for a guy who has PM'd me, hope it isn't inside the box. lol)
Glove box with string stopper - $60
Factory ECU - $150
Seat rails - $Not sure as I may be keeping them for the RX7 as I am keeping the seats, as the RX7 seats aren't comfy for me as I now have to use it as a daily driver.
Seat belts, GENUINE NISSAN good nic - $160 for the lot.
All boot trim - $200.
Space saver tyre original - $130.

EXTRAS:
Shell, registerable - $3000, no rust (includes glass)
4x 225/40/18 Pirelli's - $200 at 50%ish tread



ANYTHING ELSE JUST ASK. :-)

Edited by RBMunkie
Link to comment
https://www.sau.com.au/forums/topic/428622-r32-gtr-wrecking-black-urgent/
Share on other sites

PASSENGER DOOR locking mechanism has been sold to

gtr0321994.

Shifter boot and heater control valve sold to: (as far as I am concerned.. lol)
luke GTR

Edited by RBMunkie

Dash:
944650_571538749557837_1429112506_n.jpg
No bubbles I can see.


The controls around the gauge cluster?
$40.

R32FREAK - the front bar and reo is sold.
But I still have the guards, hood and latch and front support and brackets.

Oh sweet, thanks for pic; ill have a think abt it. But also do you have the pipe that connects the twin turbo pipe to the intercooler piping (in pic below) and would you sell it separately as i need one badly. Thx.

IMG 4473

Chasing the following in good condition

>> 1. Interior door handles

>> 2. Rubber seals/linings around door windows

>> 3. inside triangular pieces opposite the side mirrors

cheers

adam

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...