Jump to content
SAU Community

Recommended Posts

I bought my car in May 2012. I was very impressed by the fact the car had all original paint and panels (with panel gaps that were 100% factory). However, the paint was not in the best condition....and I always thought my car looked a tad dull compared to other examples I've seen in real life and on the internet.

It is now in July 2013, that I have finally gotten around to restoring the car back to its former glory, sort of. The reason I say sort of is because the front bumper is pelted with rock chips, the rear bar is a scratched through the clear coat, and the bonnet has a fair few stone chips which would require a lot of brush touching.

Now, I drive this car on a daily basis. I strongly believe that a performance car is built to be driven, and also kept looking nice. I think it is a bit of a shame when performance cars rarely ever come out of the garage.

I believe you develop a better bond with your car by appreciating how to tackle all the shapes and curves of the car through detailing. I use a Dual Action Polisher, and with the correct pad and product selection, you CAN achieve the same results as with a Rotary, but with less risk. The only downside is it will take a bit more time.

Here is my album of photographs BEFORE starting the DETAIL.

http://imgur.com/a/lLaNY#0


I put roughly a LOT of man hours into this restoration. I did an extensive amount of prep work before I commenced a 3 stage polishing regimen with an aggressive compound, intermediate polish, and a jewelling polish.

& Here are my results....(the pictures taken are with a sealant applied after polishing, once I apply carnauba wax I will take the car out in sunlight and take more pictures). I haven't applied trim conditioners or anything either yet.

lg4P6Jk.jpg

lg4P6Jk.jpg

Mfm28Yj.jpg

kzvjwjt.jpg

uY87nWp.jpg

luSMWvI.jpg

qyYuA5U.jpg

pT5ezE7.jpgAm6kcAi.jpgXfK9qJT.jpggtOxfVF.jpg

2Rav3js.jpg

WlB1O5n.jpg

ar1kBUC.jpg

4ZPEOM8.jpg

eAMZqHo.jpg

ppMrHG2.jpg

  • Like 1

Would've helped if you noted which photos were which, as it's kind of hard to see the differences before and after detailing. Put them in some sort of order.

Not sure what you mean. The album link is all the before photos. Just a random assortment showing the paint has a lot of scratches, swirls, etching, general contamination etc.

The pictures posted in this thread here are after photos. As you can tell, there is none of that present in the after photos.

Well done mate looking sweet so far. Saw a random bottle of ammo - who stocks the stuff in oz?

Hi, thanks man.

I got my stuff via airmail from Ammo in America. I used AMMO skin to seal the car.

  • 3 weeks later...
  • 4 weeks later...

Well, it's now been close to 2 months since I completed the detail....

I spent some time today washing the car, and then I applied a layer of carnauba wax, let it sit for 45 minutes, then buffed it off by hand with a megs microfiber towel.

These pictures should give you a good idea of how the car looks in natural lighting in the afternoon.

The reflections really have a lot of clarity which I'm super happy about, as I was able to remove a lot of the factory orange peel in the paint when I went through the compounding to polishing phases (this was my one of my goals).

Roof

rdnG2ZJ.jpg

Roof

NrCSzSc.jpg

Hey Benji great job, just thought I'd ask is have you used autoglym super resin polish and hd wax before? You can source the polish via eBay for half the price retailers in aussieland can sell it for and the wax the cheapest I've seen is about $85 but seriously its easy to apply and easy to come off and it makes a fantastic difference

Hey Benji great job, just thought I'd ask is have you used autoglym super resin polish and hd wax before? You can source the polish via eBay for half the price retailers in aussieland can sell it for and the wax the cheapest I've seen is about $85 but seriously its easy to apply and easy to come off and it makes a fantastic difference

Hi Ken,

Cheers!

As for your questions:

Super resin polish - it is lightlyyyy abrasive but its downfall is it contains a lot of fillers. After you polish these fillers will be left to hide swirls or scratches. If you want to remove scratches completely you'd use a different product.

Hd wax - I am not too familiar with the HD wax...but if it is priced at $85 I assume it would be a good carnauba based wax.

I use Dodo juice supernatural carnauba wax (can get it from the UK for an ok price) applied over a base of AMMO NYC sealant (sealant is applied, buffed off with MF towel, left to cure for 24 hrs to bond to the paint, then I apply wax over the top). It is a really good wax and makes the paint absolutely look like glass, but it shares the downfall of any carnauba wax is it attracts a lot of dust. I'll only need to have taken the car out once or twice and there will be a fine layer of dust sitting on the car.

  • 2 months later...

Here is a picture of my car taken with an SLR camera....should give you guys a good idea of the finish.

Washing every 2 weeks and waxing every 4-6 weeks to protect and maintain the finish.

DAQbnNE.jpg

Oh damn love how it's turned out! all the panels look like they have a sheet of glass over it. love it!

Can definitely tell you've put a lot of hard hours into this and it's payed off!

Good write up with lots of pics, nice car! Its nice to see that your putting a lot of love into it even with the simplest things.

being a daily you'd want it to look nice not only for yourself but to catch eyes, one of my fav cars :worship:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...