Jump to content
SAU Community

Recommended Posts

hey inasnt nice 1! I think i will just have to wait 4 u dudes. Since i think my pockets are only deep enough to just paint my sideys, which sux so i'll just have to wait. Everytime i walk into my room i get p1ssed off coz my skirts are there staring at me i want them on lol. Also need repair on the front since the first shop i went was damn SHIAT.

cheers guys.

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

thanks for that nismo32r. What happnd?

My friend had a Series 8 RX7 and bought a gen Boxmax bodylit from jap for few k's

he asked aresspeed to paint and fit them on the car...

at the end the car turn out like a 30k worthy car

the color is not matching+the kit is not fitted properly+they drill holes on the body to screw front and rear bumpers and skirts...

if i have a chance...i will post up pics to show you guys

Guest INASNT
I am just about to get a body kit from either MakSpeed or Jetspeed. Makspeed quoted me $1200 and Jetspeed $1400 for the same kit. Just wondering what your opinions would be on the quality of the products, I dont mind paying extra if Jetspeed has a better quality product. Any thoughts?

I will be able to supply them for around $1000

damn that sux arsse nismo32r. not much should be done to a genuine kit... Inasn't how much for rear bars only? u got painting and fitting options?

went to all my local panel shops and the average just for fitting and painting was $400 bux approx i was like wtf?. i did find 1 place kinda dodgy but they give lifetime warranty on paint and the dudes are respraying a soarer and it looks mint from what they have done. $350 for fit and paint sidies. as well as custom reinforce front bar from dodgy first job as well as adjust the bonnet and light from a stack. So i might go with them. Inasn't how long till ur business is up and running man.

whats ur experience with them dazsQ as GT400r sez they did a crap job for him and fibre glass wasn't that good quality?

DJR33 what veilside kit u want there are 2 for 33's.

i think i'm getting it done this week at local panel shop. Once its done i'll post up pix.

whats ur experience with them dazsQ as GT400r sez they did a crap job for him and fibre glass wasn't that good quality?  

DJR33 what veilside kit u want there are 2 for 33's.  

i think i'm getting it done this week at local panel shop. Once its done i'll post up pix.

I want the kit for the gtst. As far as i know theres only 2 kits, one for the gtst and one for gtr. All the pics ive seen of the kit on 33's look really low, but that might be coz all of the cars have been lowered. I dont want anything that wont allow me to go over speed bumps

there are two kits for GTS and 2 for GTR.

I got the car back today and i'm very very happy with the job.

It cost 350 for:

- fitting and painting of sideskirts

- pushing out the light (which was slightly pushed in from previous stack)

- realigning bonnet also from previous stack

- re-doing mesh (coz dodgy bodykit shop i got it from used builders bog and it came off, what a surprise)

-making brackets to hold bar in more firm (dodgy bodykit shop just bolted it on ends and used super dodgy brackets in the middle)

also washed the car which was cool, and all of this was done in 1 day dropped it off at 8 and picked it up at 5.

Place was TJ panels in seaford. I'll post up pix on monday.

Guest INASNT

Guys if you want bodykits, i can get you any kit that jetspeed or others can get for around $1100 unpainted delivered to Melbourne in about 2 weeks once a deposit is put down.

All i need is a pic of the kit to check if the mould is available so it can be made and sent within 2 weeks.

whats ur experience with them dazsQ as GT400r sez they did a crap job for him and fibre glass wasn't that good quality?  

friend just got a fit and spray rear bar for 180sx for $300 i think it was.. didn't use their bodykit so can' t comment on that.. but the fit and spray colour matched well and job was well done

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...