Jump to content
SAU Community

Recommended Posts

WOLLONGONG MEET UP
WE WILL NOW MEET WITH ANYONE FROM WOLLONGONG THAT IS KEEN TO CRUISE WITH US IN ALBION PARK AT THE SKATE PARK CAR PARK ON RUSSELL STREET
AS THIS IS EASIER WAY AS THE MAQUARIE PASS IS JUST THERE AND WE CAN ALL CRUISE AS ONE.....WE ARE LEAVING SYDNEY AT 9:30 SO SHOULD BE THERE FROM AROUND 10:30-10:45......WE WILL LEAVE THIS CAR PARK AT 11:00-11:15 DEPENDING ON THE TIME WE GET THERE....

addqZELA.png

acfnkFTn.jpg

What: Sydney to Robertson Pie Shop Cruise

When: Sunday 8th of September 2013

Meet Up: Costco carpark across KFC Carpark - Casula Home Depot Centre Crossroads - Camden Valley Way

The costco carpark is open but costco isn't which makes this an advantage for us...car park is empty

Meet Time: 9:00am

Leave Time: 9:30am

Bring the Following - UHF Radio (will be on channel 16) - Full tank of fuel - good attitude and happy smiles - cameras and go pros - money for pie shop

Route: We will meet up at the KFC car park in Casula off Camden valley way. We will then head down the hume highway till we then come up to Picton Road, we will

follow that through to the Mount Keira Pass (few twist and turns here). we will then turn onto the F6 Freeway aka Princess Hwy and follow that down to the Illawarra

Hwy through the Macquarie pass (this is where the fun begins lots of twist and turns) we then arrive at the Robertsons Pie Shop at the end of our destination.

FOR THOSE INTERESTED: After the Pie Shop a few of us are cruising back up to sydney (Eveleigh to be exact to go visit the "showcased" car show brought to you by The-Lowdown....$20 a head to get in.... http://www.the-lowdown.com/showcased-2013/

Rules for this cruise: As with any cruise, no hooning, no burnouts and no wreckless behavior. Please behave on the day as we don't the boys in blue to show up or for anyone to loose their license or car smashed on the day.

As before there will be other various forums coming aswell....

map
https://maps.google....sp=1&sz=17&z=17

Please ignore the path on picton road as this map bypasses Mount Keira Pass, but we will be taking the picton road - WE WILL NOT BE TAKING Mount Keira Pass THEN WE WILL BE GOING TO RUSSELL ST IN ALBION PARK TO THE SKATEPARK CAR PARK TO MEET WITH ANYONE FROM WOLLONGONG

Who's Going

1 sleek3 - C34 Nissan Stagea Dayz RS4
2 twenty-B - Mazda 3 MPS - Ausrotary
3 4tune - S13 - MCM
4 Daniel - K24A EK civic
5 Harley - Golf R
6 Brent - AE86 4age turbo
7 alex - s14
8 nathan - evo 8 MR
9 Ben - SAAB 9-3 turbo
10 Kingtube69 - ae92 20v / lancer - MCM
11 FullySik - Opel Astra - MCM
12 chrisj92 - Liberty RS turbo - MCM
13 oddzee - commodore - MCM
14 Mungulz - Volvo - MCM
15 Ahvalook - R31 - MCM
16 4tune - S13 - MCM
17 Amdjames - vt commodore - MCM
18 mauswerkz - BMW - MCM
19 Raisin - car? - MCM
20 isaacvoodoo - suzuki alto 1.3L Turbo
21 KLR816 - CRX - JDMST
22 Ahvalook - R31 - JDMST
23 hallzee - MA61 - JDMST
24 fatboyg - 90 hilux 1jz - MCM
25 Dodge - pulsar - MCM
26 Glennjamin - pulsar - MCM
27 Trivial - ae92 rolla - MCM
28 Spoblin - EJ civic - MCM
29 beatz299 - car? - MCM
30 Johnvirus - Magna - MCM
31 lukusis - ae92 - MCM
32 rippzz112 - liberty wagon - MCM
33 emmKay - FG xr6 - MCM
34 dagher23q - DC5 type R - JDMST
35 JDM-EK-K24 - K24 turbo ek civic - JDMST
36 JONO - KE70 - JDMST
37 sn00ze - S14 - JDMST
38 mate of dagher23q - DC2 type R - JDMSt
39
40

luke are you sure you are talking about this cruise because the week after this cruise is the SAU cruise to robertson? just i dont get some of your comments?

yep, my retardedness.

cant even read thread names.

very sorry.

Not sure if you are taking Mt Keira or not, but just so you know its been closed down for awhile now. Best to avoid it altogether and stay on Picton Rd.

Oh on Picton Rd there are roads works and police have been hitting that area lately, 60 and 80 zones, best not to speed through them.

Hope the run goes well.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...