Jump to content
SAU Community

Recommended Posts

WOLLONGONG MEET UP
WE WILL NOW MEET WITH ANYONE FROM WOLLONGONG THAT IS KEEN TO CRUISE WITH US IN ALBION PARK AT THE SKATE PARK CAR PARK ON RUSSELL STREET
AS THIS IS EASIER WAY AS THE MAQUARIE PASS IS JUST THERE AND WE CAN ALL CRUISE AS ONE.....WE ARE LEAVING SYDNEY AT 9:30 SO SHOULD BE THERE FROM AROUND 10:30-10:45......WE WILL LEAVE THIS CAR PARK AT 11:00-11:15 DEPENDING ON THE TIME WE GET THERE....

addqZELA.png

acfnkFTn.jpg

What: Sydney to Robertson Pie Shop Cruise

When: Sunday 8th of September 2013

Meet Up: Costco carpark across KFC Carpark - Casula Home Depot Centre Crossroads - Camden Valley Way

The costco carpark is open but costco isn't which makes this an advantage for us...car park is empty

Meet Time: 9:00am

Leave Time: 9:30am

Bring the Following - UHF Radio (will be on channel 16) - Full tank of fuel - good attitude and happy smiles - cameras and go pros - money for pie shop

Route: We will meet up at the KFC car park in Casula off Camden valley way. We will then head down the hume highway till we then come up to Picton Road, we will

follow that through to the Mount Keira Pass (few twist and turns here). we will then turn onto the F6 Freeway aka Princess Hwy and follow that down to the Illawarra

Hwy through the Macquarie pass (this is where the fun begins lots of twist and turns) we then arrive at the Robertsons Pie Shop at the end of our destination.

FOR THOSE INTERESTED: After the Pie Shop a few of us are cruising back up to sydney (Eveleigh to be exact to go visit the "showcased" car show brought to you by The-Lowdown....$20 a head to get in.... http://www.the-lowdown.com/showcased-2013/

Rules for this cruise: As with any cruise, no hooning, no burnouts and no wreckless behavior. Please behave on the day as we don't the boys in blue to show up or for anyone to loose their license or car smashed on the day.

As before there will be other various forums coming aswell....

map
https://maps.google....sp=1&sz=17&z=17

Please ignore the path on picton road as this map bypasses Mount Keira Pass, but we will be taking the picton road - WE WILL NOT BE TAKING Mount Keira Pass THEN WE WILL BE GOING TO RUSSELL ST IN ALBION PARK TO THE SKATEPARK CAR PARK TO MEET WITH ANYONE FROM WOLLONGONG

Who's Going

1 sleek3 - C34 Nissan Stagea Dayz RS4
2 twenty-B - Mazda 3 MPS - Ausrotary
3 4tune - S13 - MCM
4 Daniel - K24A EK civic
5 Harley - Golf R
6 Brent - AE86 4age turbo
7 alex - s14
8 nathan - evo 8 MR
9 Ben - SAAB 9-3 turbo
10 Kingtube69 - ae92 20v / lancer - MCM
11 FullySik - Opel Astra - MCM
12 chrisj92 - Liberty RS turbo - MCM
13 oddzee - commodore - MCM
14 Mungulz - Volvo - MCM
15 Ahvalook - R31 - MCM
16 4tune - S13 - MCM
17 Amdjames - vt commodore - MCM
18 mauswerkz - BMW - MCM
19 Raisin - car? - MCM
20 isaacvoodoo - suzuki alto 1.3L Turbo
21 KLR816 - CRX - JDMST
22 Ahvalook - R31 - JDMST
23 hallzee - MA61 - JDMST
24 fatboyg - 90 hilux 1jz - MCM
25 Dodge - pulsar - MCM
26 Glennjamin - pulsar - MCM
27 Trivial - ae92 rolla - MCM
28 Spoblin - EJ civic - MCM
29 beatz299 - car? - MCM
30 Johnvirus - Magna - MCM
31 lukusis - ae92 - MCM
32 rippzz112 - liberty wagon - MCM
33 emmKay - FG xr6 - MCM
34 dagher23q - DC5 type R - JDMST
35 JDM-EK-K24 - K24 turbo ek civic - JDMST
36 JONO - KE70 - JDMST
37 sn00ze - S14 - JDMST
38 mate of dagher23q - DC2 type R - JDMSt
39
40

luke are you sure you are talking about this cruise because the week after this cruise is the SAU cruise to robertson? just i dont get some of your comments?

yep, my retardedness.

cant even read thread names.

very sorry.

Not sure if you are taking Mt Keira or not, but just so you know its been closed down for awhile now. Best to avoid it altogether and stay on Picton Rd.

Oh on Picton Rd there are roads works and police have been hitting that area lately, 60 and 80 zones, best not to speed through them.

Hope the run goes well.



  • Similar Content

  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...