Jump to content
SAU Community

Recommended Posts

WOLLONGONG MEET UP
WE WILL NOW MEET WITH ANYONE FROM WOLLONGONG THAT IS KEEN TO CRUISE WITH US IN ALBION PARK AT THE SKATE PARK CAR PARK ON RUSSELL STREET
AS THIS IS EASIER WAY AS THE MAQUARIE PASS IS JUST THERE AND WE CAN ALL CRUISE AS ONE.....WE ARE LEAVING SYDNEY AT 9:30 SO SHOULD BE THERE FROM AROUND 10:30-10:45......WE WILL LEAVE THIS CAR PARK AT 11:00-11:15 DEPENDING ON THE TIME WE GET THERE....

addqZELA.png

acfnkFTn.jpg

What: Sydney to Robertson Pie Shop Cruise

When: Sunday 8th of September 2013

Meet Up: Costco carpark across KFC Carpark - Casula Home Depot Centre Crossroads - Camden Valley Way

The costco carpark is open but costco isn't which makes this an advantage for us...car park is empty

Meet Time: 9:00am

Leave Time: 9:30am

Bring the Following - UHF Radio (will be on channel 16) - Full tank of fuel - good attitude and happy smiles - cameras and go pros - money for pie shop

Route: We will meet up at the KFC car park in Casula off Camden valley way. We will then head down the hume highway till we then come up to Picton Road, we will

follow that through to the Mount Keira Pass (few twist and turns here). we will then turn onto the F6 Freeway aka Princess Hwy and follow that down to the Illawarra

Hwy through the Macquarie pass (this is where the fun begins lots of twist and turns) we then arrive at the Robertsons Pie Shop at the end of our destination.

FOR THOSE INTERESTED: After the Pie Shop a few of us are cruising back up to sydney (Eveleigh to be exact to go visit the "showcased" car show brought to you by The-Lowdown....$20 a head to get in.... http://www.the-lowdown.com/showcased-2013/

Rules for this cruise: As with any cruise, no hooning, no burnouts and no wreckless behavior. Please behave on the day as we don't the boys in blue to show up or for anyone to loose their license or car smashed on the day.

As before there will be other various forums coming aswell....

map
https://maps.google....sp=1&sz=17&z=17

Please ignore the path on picton road as this map bypasses Mount Keira Pass, but we will be taking the picton road - WE WILL NOT BE TAKING Mount Keira Pass THEN WE WILL BE GOING TO RUSSELL ST IN ALBION PARK TO THE SKATEPARK CAR PARK TO MEET WITH ANYONE FROM WOLLONGONG

Who's Going

1 sleek3 - C34 Nissan Stagea Dayz RS4
2 twenty-B - Mazda 3 MPS - Ausrotary
3 4tune - S13 - MCM
4 Daniel - K24A EK civic
5 Harley - Golf R
6 Brent - AE86 4age turbo
7 alex - s14
8 nathan - evo 8 MR
9 Ben - SAAB 9-3 turbo
10 Kingtube69 - ae92 20v / lancer - MCM
11 FullySik - Opel Astra - MCM
12 chrisj92 - Liberty RS turbo - MCM
13 oddzee - commodore - MCM
14 Mungulz - Volvo - MCM
15 Ahvalook - R31 - MCM
16 4tune - S13 - MCM
17 Amdjames - vt commodore - MCM
18 mauswerkz - BMW - MCM
19 Raisin - car? - MCM
20 isaacvoodoo - suzuki alto 1.3L Turbo
21 KLR816 - CRX - JDMST
22 Ahvalook - R31 - JDMST
23 hallzee - MA61 - JDMST
24 fatboyg - 90 hilux 1jz - MCM
25 Dodge - pulsar - MCM
26 Glennjamin - pulsar - MCM
27 Trivial - ae92 rolla - MCM
28 Spoblin - EJ civic - MCM
29 beatz299 - car? - MCM
30 Johnvirus - Magna - MCM
31 lukusis - ae92 - MCM
32 rippzz112 - liberty wagon - MCM
33 emmKay - FG xr6 - MCM
34 dagher23q - DC5 type R - JDMST
35 JDM-EK-K24 - K24 turbo ek civic - JDMST
36 JONO - KE70 - JDMST
37 sn00ze - S14 - JDMST
38 mate of dagher23q - DC2 type R - JDMSt
39
40

luke are you sure you are talking about this cruise because the week after this cruise is the SAU cruise to robertson? just i dont get some of your comments?

yep, my retardedness.

cant even read thread names.

very sorry.

Not sure if you are taking Mt Keira or not, but just so you know its been closed down for awhile now. Best to avoid it altogether and stay on Picton Rd.

Oh on Picton Rd there are roads works and police have been hitting that area lately, 60 and 80 zones, best not to speed through them.

Hope the run goes well.



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...