Jump to content
SAU Community

Recommended Posts

Hi all,

I'm in the process of clearing out all my spare parts from owning 3 GTR's!

Prices are negotiable! If I haven't provided photos they are available on request!

- R32 GTR Front subframe

$200

- R32 GTR Rear cradle - at this stage I want to try and sell it complete - literally a bolt up and drive away affair - subframe, diff, shafts, hubs, handbrake assembly, stock control arms etc

$500 (I'm taking a stab in the dark at price for this)

- R32 GTR front and rear factory swaybars

$150 for both

- R32 GTR RB26 sump with diff

$150

-R32 GTR Bonnet - straight but looks like it's been sanded back and painted by a 3 year old. Also has holes for N1 bonnet lip.

$300

- R32 GTR alloy guards - again these are straight but will require stripping and repainting

$150 both

- R32 GTR heater core

$75?

- R32 GTR front reo

$150

- R32 GTR rear reo

$100?

- R32 GTR prop shaft

$50

All parts located in Mawson Lakes, Adelaide. Would prefer to sell the heavy things locally, unless buyer wants to arrange freight.

I also have a bunch of other R32 GTR parts that I haven't sorted yet because I need to get rid of everything above to make room to sort it out!!

Best form of contact is 0405329361 otherwise PM on here.

Cheers,

Jon

P.S. Someone should buy this too http://www.skylinesaustralia.com/forums/topic/424997-fs-r32-gtr-rolling-shell/#entry6846019

post-13041-0-49668500-1375418073_thumb.jpg

post-13041-0-98401500-1375418150_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/429619-fs-r32-gtr-parts-adelaide/
Share on other sites

  • 2 weeks later...

I do...although the one sitting in my garage I am holding to put into my street car. The one in my street car has a slight bubble on the far passenger side, maybe 2-3 inches in length which will be for sale.

UPDATE

- R32 GTR Front subframe

$200

- R32 GTR Rear cradle - at this stage I want to try and sell it complete - literally a bolt up and drive away affair - subframe, diff, shafts, hubs, handbrake assembly, stock control arms etc

$500 (I'm taking a stab in the dark at price for this)

- R32 GTR front and rear factory swaybars

$150 for both

- R32 GTR RB26 sump with diff

$150

-R32 GTR Bonnet - straight but looks like it's been sanded back and painted by a 3 year old. Also has holes for N1 bonnet lip.

$300

- R32 GTR alloy guards - again these are straight but will require stripping and repainting

$150 both

- R32 GTR heater core

$75?

- R32 GTR front reo

$150

- R32 GTR rear reo

$100?

- R32 GTR prop shaft

$50

- R32 GTR steering rack, good used condition

$200

All prices negotiable

post-13041-0-04975500-1376486275_thumb.jpg

post-13041-0-14951500-1376486320_thumb.jpg

post-13041-0-02121300-1376486384_thumb.jpg

post-13041-0-51264100-1376486509_thumb.jpg

post-13041-0-64893300-1376486655_thumb.jpg

Edited by big JON
  • 2 weeks later...

UPDATE

- R32 GTR Front subframe

$200 $150

- R32 GTR Rear cradle - at this stage I want to try and sell it complete - literally a bolt up and drive away affair - subframe, diff, shafts, hubs, handbrake assembly, stock control arms etc

$500 (I'm taking a stab in the dark at price for this)

- R32 GTR front and rear factory swaybars

$150 for both

- R32 GTR RB26 sump with diff

$150 $100

-R32 GTR Bonnet - straight but looks like it's been sanded back and painted by a 3 year old. Also has holes for N1 bonnet lip.

$300

- R32 GTR alloy guards - again these are straight but will require stripping and repainting

$150 both

- R32 GTR heater core

$75?

- R32 GTR front reo

$150

- R32 GTR rear reo

$100?

- R32 GTR prop shaft

$50

- R32 GTR steering rack, good used condition

$200 $150

All prices negotiable

UPDATE

R32 GTR Rear cradle - at this stage I want to try and sell it complete - literally a bolt up and drive away affair - subframe, diff, shafts, hubs, handbrake assembly, stock control arms etc

$500 (I'm taking a stab in the dark at price for this)

- R32 GTR front and rear factory swaybars

$150 for both

- R32 GTR Bonnet - straight but looks like it's been sanded back and painted by a 3 year old. Also has holes for N1 bonnet lip.

$300

- R32 GTR alloy guards - again these are straight but will require stripping and repainting

$150 both

- R32 GTR heater core

$75?

STUFF THAT HASN'T SOLD

- R32 GTR aftermarket front pipes. 2.5" intake into 3"

$300

- R32 GTR Front subframe

$150

- R32 GTR steering rack, good used condition

$150

R32 GTR RB26 sump with diff

$100

- R32 GTR front reo

$100

- R32 GTR rear reo

$75

- R32 GTR prop shaft

$40

- R32 GT

- R32 GTR boot with wing, painted in primer, no lock

$150

- R32 GTR front grille, also in primer

$100

- R32 GTR accelerator pedal and cable

$40

- R32 GTR steering column, ignition barrel, boot lock and door locks keyed alike

$200

- R32 GTR glove box

$50

- R32 GTR under steering wheel interior plastic with fuse panel

$20

- R32 GTR steering column surround

$40

- R32 GTR dash panel facia

$20

- R32 GTR centre console panel radio surround

$50

- R32 GTR centre console

$50

- R32 GTR parcel shelf

$50

- R32 GTR sill scuff panels (right and left)

$40 each or $70 the pair

- R32 GTR kick panels (left and right)

$25 each or $40 the pair

- R32 GTR rear quarter interior trim panels

$100 the pair

- R32 GTR under carpet air vent

$40

- R32 GTR complete carpet in reasonable condition

$100

- R32 GTR roof lining, dirty but otherwise good condition

$30

R32 GTR interior map light

$20

- R32 GTR jesus handles

$20

- R32 GTR boot trim (missing RHS section)

$50 the lot

- R32 GTR ECU lucky dip

$100

- R32 GTR

  • 4 weeks later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...