Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

With the introduction of allowing R rated games they can't exactly b sn it for that and with the amount of studies proving the games don't make people violent they have no cause to do so.

R rated games is less of an issue than you think. Before R rated games were a thing there were less than a dozen games that were refused classification and of those most had some minor tweak to get it past the censors (e.g. changing the name of one item in Fallout 3/NV so it doesn't reference morphine, stopping you from beating hookers to death after hiring them in GTA3 etc)

The main reason the R rating was pushed by industry groups was to stop little timmy buying it, not to allow for more graphic content.

As for the studies, well they are actually inconclusive. For every well designed study finding no correlation between violent games and aggressive behaviour there is another that does find a link. Playing a violent game may not make you a killer, but it may exacerbate underlying issues. This isn't unique to games however, it applies to all forms of media consumption. Why do you think they put helpline numbers on every news article about suicide? Because reading the news article may tip a severely depressed person over the edge.

Average beer is average.

I'd be happy if I had more than 2 choices of black beer at First Choice.

I care not for your beer opinion anymore. I like it, everyone else at work likes it so take your booze snobbery else where :P

I care not for your beer opinion anymore. I like it, everyone else at work likes it so take your booze snobbery else where :P

Not snobbery, just my opinion. The larger is (to me) an ordinary, run of the mill

Larger and the pacific ale is just a mild APA. I'm finding my taste in beer and wine getting bigger and bigger, these just don't do it for me any more.

Not snobbery, just my opinion. The larger is (to me) an ordinary, run of the mill

Larger and the pacific ale is just a mild APA. I'm finding my taste in beer and wine getting bigger and bigger, these just don't do it for me any more.

Enough of beer. Time for spirits. :P

Mountains were fun. :) need bigger brakes and coil overs.

This is true, I need suspension and brakes, I swear pinky has neither... They are so stock I think they have disintegrated lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...