Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Sorry, up the road towards city. Units next to the servo (used to be BP?) and Dominos (possibly still there???)

Right near where that mechanic crashed the customers porsche and died couple of years back.

Ahh i see, its a 7/11 servo now and dominos is still there, that's pretty close to my place.

The Breeze is good down there, we go to the park to do our work outs by the river, great spot for it.

Everyone thought it would never flood again I think!

Well if they didn't use wivenhoe as water storage we wouldn't have had the problem in the first place :/

Well if they didn't use wivenhoe as water storage we wouldn't have had the problem in the first place :/

Well it is designed with both storage (46% of capacity) and flood mitigation in mind (54%) and is only designed to reduce peak height by a meter, it achieved this in 2011. It was peoples expectations that failed rather than the dam! Most of the water came out of the Lockyer anyway which joins the Brisbane River below the dam, it was all just a series or really unfortunate events.

Yeah I guess. Then started the blame game :/

Yeah, the flood commission was a total joke with the finger pointing, some of my measurments got submitted as evidence to that, had to go and sit there for a day, terrible waste of everyone's time!

Yeah, the flood commission was a total joke with the finger pointing, some of my measurments got submitted as evidence to that, had to go and sit there for a day, terrible waste of everyone's time!

Such a fun job :P Do you often get questioned regarding the validity of the data you provide?

Such a fun job :P Do you often get questioned regarding the validity of the data you provide?

Always

Yeah although it's not the best image to have the exec arguing publicly like that :P

Just start a little earlier ;) by the time we get there only the crying is left

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
    • This. The R34 handbrake icon DOES come up when the brake fluid level is low. You might be sitting right on that threshhold. I have been down this diagnosis path and this was the solution (and it was pretty much as full as your picture is to begin with).
×
×
  • Create New...